As Designed Cut Mode: FrameShop Cut Preview Screen

Select As Designed from the Cut Mode dropdown control to cut the outside as originally designed on the CMC Z1 and Z (9000z).

Click the Set Advanced Options button to access the Advanced Outside Options. 

Select As Designed from the Cut Mode dropdown control.

The outside edge of the design or tiled designs will be cut as originally designed. 

This can be helpful when coming from Trace or Nesting where you had already selected how you want the outside(s) to be cut.  

If you have Remnant Trimming on, it will also cut off the scrap edge.

The default setting for Cutting the Outside can be set in the Admin > Editor section.

The default setting for 90 Degree Outside can be set in the Admin > Cutting section.

The default setting for the Advanced Options can be set in the Admin > Cutting section.

The default setting for the Cut Mode can be set in the Admin > Cutting section.