Eclipse: Footblock: Changing the Cartridge Holder Footblocks

The 90° Blade Holder Footblock is located on the left and the 45°+ Blade Holder Footblock is located on the right.

Replacing the Left 90° Cartridge Footblock

Replacing the Left 90° Cartridge Footblock
Use the Footblock Tool to remove the current 90° Cartridge Footblock.	Use the Footblock Tool to remove the current 90° Cartridge Footblock
Use the Footblock Tool to remove the current 90° Cartridge Footblock, turning it counter-clockwise half a turn to loosen it.	Use the Footblock Tool to Remove the Current 90° Cartridge Footblock
Pull the current 90° Cartridge Footblock tool out from the Trolley.	Pull the Current 90° Cartridge Footblock Tool out From the Trolley
Place the new 90° Cartridge Footblock tool into the Trolley.	Place the New 90° Cartridge Footblock Tool into the Trolley
Use the Footblock Tool to secure the current 90° Cartridge Footblock into place, turning it clockwise half a turn to tighten it. The tool is now ready to be used.	Use the Footblock Tool to Secure the Current 90° Cartridge Footblock into Place

Replacing the Right 45°+ Cartridge Footblock

Replacing the Right 45°+ Cartridge Footblock
Use the Footblock Tool to remove the current 45°+ Cartridge Footblock.	Use the Footblock Tool to Remove the Current 45°+ Cartridge Footblock
Use the Footblock Tool to remove the current 45°+ Cartridge Footblock, turning it counter-clockwise half a turn to loosen it.	Use the Footblock Tool to Remove the Current 45°+ Cartridge Footblock, Turning it Counter-Clockwise
Remove the current 45°+ Cartridge Footblock from the Trolley.	Remove the Current 45°+ Cartridge Footblock From the Trolley
Place the new 45°+ Cartridge Footblock into the Trolley. Use the Footblock Tool to secure the current Cartridge Footblock into place, turning it clockwise half a turn to tighten it. The tool is now ready to be used.	Place the new 45°+ Cartridge Footblock into the Trolley and Use the Footblock Tool to secure the current Cartridge Footblock into place

Knowledge Base