/
Eclipse: Start up the System

Eclipse: Start up the System

Turn On the Vacuum Pump

Turn On the Vacuum Pump

  • Turn on the vacuum pump. The vacuum pressure is used to hold the matboard in place while the machine cuts and controls the cutting and other machinery mechanisms.

Start Up the Software

Start Up the Software

  • Start Up the FrameShop Software if it is not already running.

Click Reset Motors

Click Reset Motors

  • Click the Reset Motors button and let the Eclipse reset itself and find the Home position. When it has finished, you will be ready to start the first project.

Click Reset Motors

Related content

Eclipse: Cutting on the Eclipse/Flex
Eclipse: Cutting on the Eclipse/Flex
More like this
Machine Operation: Eclipse Pro Legacy
Machine Operation: Eclipse Pro Legacy
More like this
Eclipse: Control Panel
Eclipse: Control Panel
More like this
Basic Mat Cutting: Eclipse Pro Legacy
Basic Mat Cutting: Eclipse Pro Legacy
More like this
Disassembly of the Eclipse Pro Legacy
Disassembly of the Eclipse Pro Legacy
More like this
Troubleshooting: Eclipse Pro Legacy
Troubleshooting: Eclipse Pro Legacy
More like this