Quick Calibration Home Adjustments: Vertical Home
Quick Calibration Home Adjustments: Vertical Home | |
---|---|
Measure the bottom border to the opening viewed from the cutting side of the mat; this example was cut from the back. If it is not 2”, adjust the Vertical Home.
Contents:
The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges. If the Opening is cut Too Far Up Vertically, Decrease the Vertical Home. If the Opening is cut Too Far Down Vertically, Increase the Vertical Home. Adjust the Vertical Home if the Opening cuts in the Wrong Place Vertically Vertical Home Configurations |