Vertical Home for Openings
Opening Cuts too Far Up Vertically (Not Cutting the Outside) | |
---|---|
Contents:
The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges. If the Opening is cut Too Far Up Vertically, Decrease the Vertical Home. If the Opening is cut Too Far Down Vertically, Increase the Vertical Home. Adjust the Vertical Home if the Opening cuts in the Wrong Place Vertically Vertical Home Configurations When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |