Disable Auto Offset: Location Tab

Disable Auto Offset: Location Tab

Disable Auto Offset: Location Tab

  • Disabling the Auto Offset will cut the design normally without being offset into the mat.

  • Click on the design to select it.

  • Uncheck the Auto Offset checkbox.

  • The design will no longer be offset and will cut the design normally unless values have been entered in the X Origin and Y Origin fields.

  • This is useful when cutting the opening from a pre-cut sheet matboard and not cutting the outside.

  • Note: The outside cut is shown here merely for visual reference of where the pre-cut matboard will be positioned on the board. This feature can also be used to move the design to avoid flaws in the matboard.

Auto Offset
Disable the Auto Offset to Cut the Design Normally without Offsetting it

Default Settings