45 Degree Front Cartridge Configurations
45 Degree Front Cartridge Configurations | |
---|---|
A Cartridge is the physical component that holds a Blade, Deboss Stylus, Pen or other application tool. Contents: | 45° Degree Front Bevel Opening and Cartridges |
45 Degree Front Cartridge Definition |
---|
The 45° Front Cartridge cuts the front of the matboard surface with the blade angled at 45°. This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The Bevel Type determines the initial blade plunge position. Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration. 45° Front Normal Bevel Opening and Cartridge See: 45 Degree Front Normal Bevel Opening Definition See: 45 Degree Front Reverse Bevel Opening Definition See: 45 Degree Front Normal Bevel Drop Definition See: 45 Degree Front Reverse Bevel Drop Definition See: 45 Degree Front Outside Definition See: 45 Degree Front Normal Bevel Closed V-Groove Definition The 45° Front Normal Bevel Opening is created by cutting into the front of the matboard surface with the blade angled at 45°, thereby slanting the bevel away from the matboard surface. The matboard core is visible from the front. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The Bevel Type determines the initial blade plunge position. Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration. The 45° Front Reverse Bevel Opening is created by cutting into the front of the matboard surface with the blade angled at 45°, thereby slanting the bevel under the matboard surface. The matboard core is not visible from the front. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The Bevel Type determines the initial blade plunge position. Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration. The 45° Front Normal Bevel Drop is created by cutting into the front of the fallout surface with the blade angled at 45°, thereby slanting the bevel away from the fallout surface. The matboard core is visible from the front. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The Bevel Type determines the initial blade plunge position. The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer. Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type dropdown control to edit this configuration. |