Applying the Vinyl Design to Another Surface

These instructions will show how to apply the vinyl object to another surface. Cut a piece of transfer paper the same size as the design. Peel the backing from the transfer paper and carefully apply the transfer paper to the face-side of the vinyl.	Apply the Transfer Sheet Over the Cut Vinyl Design
Using a squeegee applicator, firmly rub the transfer paper onto the vinyl to make sure it firmly adheres.	Rub the Transfer Sheet to Firmly Affix the Vinyl Design to it
Turn the vinyl over and carefully peel the paper backing away from the transfer paper.	Carefully Peel Away the Backing Paper Away from the Transfer Sheet
You now have the vinyl on the transfer paper.	The Vinyl Design is Now on the Transfer Paper
Carefully align the vinyl into the desired position on the glass (or other material) and firmly press into position.	Align the Vinyl Design onto the Desired Surface and Apply it
Use the squeegee applicator, firmly rub the transfer paper to press the vinyl adhesive onto the surface to make sure it firmly adheres.	Rub Over the Vinyl Design Surface to Apply it onto the Desired Surface
Carefully peel off the transfer paper from the vinyl.	Gently Peel Away the Transfer Sheet From the Design
The vinyl is now applied to the glass.	The Vinyl Design as Been Applied

FrameShop 7x