Plunge Count Number Field

Setting the Plunge Count

Setting the Plunge Count

The Plunge Count controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change.
- In this example, the 45 Degree Cartridge Plunge Count has been set to Forty plunges.

For Additional Information:
See: Blade Change: How to Pause Automatically for Blade Change
See: Blade Plunges: How Many Plunges for the Plunge Count
Adjust the Plunge Count in the Configuration Screen for each blade cartridge.
See Plunge Count Toggle to toggle ON the Plunge Count on the Cut Preview.

The Plunge Count controls the number of Blade Plunges for each Blade Cartridge before pausing for a Blade Change.

If it doesn’t prompt for a Blade Change during the cut, enter the Plunge Count value and select Plunge Count on the Cut Preview.

If you don’t want it to prompt for a Blade Change during the cut, unselect Plunge Count on the Cut Preview.

Adjust the Plunge Count to Pause the Cutting to Change the Blade After the Entered Number of Plunges

See: Plunge Count Function

Adjust the Plunge Count to Pause the Cutting to Change the Blade After the Entered Number of Plunges