45 Degree Cartridge

  • The 45° Cartridge cuts the Bevel Angle on the matboard at 45°.

  • This Bevel Angle is displayed on the Front or the Back of the mat depending upon the selected Bevel Type.

    • The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

    • The Bevel Type determines the initial blade plunge position.

  • The 45° Blade Cartridge does not support Blade Depths above 16.

  • The Black 45° Blade Cartridge is labeled “45” with a 45° Angle Symbol on the Cartridge end.

    • Older systems may have a 45° Black Plastic Blade Cartridge. 


Contents:

45MetalBevelOpeningCartridge70800.png
45° Normal Bevel Opening and Cartridge
End45Cartridge70800.png
45° Blade Cartridge End