Horizontal Home for V-Grooves

Horizontal Home for V-Grooves

The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges.
If the V-Groove is cut Too Far Left Horizontally, Increase the Horizontal Home.
If the V-Groove is cut Too Far Right Horizontally, Decrease the Horizontal Home.

For Additional Information:
See Horizontal Home which defines the global Horizontal placement of objects cut with the Blade Cartridges.
See Horizontal Home on the Troubleshooting Utility to adjust the bladed cartridges.
See Horizontal Adjustment for placement adjustment of the non-blade Tools.

The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges.

If the V-Groove is cut Too Far Left Horizontally, Increase the Horizontal Home.

If the V-Groove is cut Too Far Right Horizontally, Decrease the Horizontal Home.

Adjust the Horizontal Home if the V-Groove cuts in the Wrong Place Horizontally

Horizontal Home for V-Grooves Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

FrameShop 7x