V-Groove Cuts too Far Left Horizontally (Not Cutting the Outside)

The Horizontal Home defines the global Horizontal placement of objects cut with the Blade Cartridges.

If the V-Groove is cut Too Far Left Horizontally, Increase the Horizontal Home.

If the V-Groove is cut Too Far Right Horizontally, Decrease the Horizontal Home.

Open

Adjust the Horizontal Home if the V-Groove cuts in the Wrong Place Horizontally

Open

Horizontal Home for V-Grooves Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.