Setting the 45 Degree Front Cartridge Default Setting

The 45° Front Blade Cartridge cuts the bevel angle on the matboard at 45° from the Front of the mat.
The 45° Front Blade Cartridge is not selected within the Editor; it is set by setting Cut From Front on the Cut Preview.

45 Degree Front Cartridge

Default Settings for the Cutting Preview

Select Change to 45° Front Blade to default to using the 45° Front Blade Cartridge when cutting a design from the front of the mat.
Click Save.
It will now use the 45° Front Blade Cartridge when you are cutting from the front.

Select Whether to Use the 45° Front Cartridge or the Standard 45° Cartridge to Cut the Mat

Default Settings

Default Settings
Cut from Front: Cutting Default Setting Cut From Front Blade Cartridge Selection: Cutting Default Setting

FrameShop 7x