You are viewing an old version of this content. View the current version.
Compare with Current View Version History
« Previous Version 23 Next »
The Air Valve Assembly, located at the top of the Gantry under the Gantry Cover, controls the mechanical functions of the Clamps Activation, Head Lift and the Blade Cartridge Plunge.
Connections:
The Air Valve Assembly is located at the top of the Gantry under the Gantry Cover.
Controlled by:
There are test buttons on the Air Valve Assembly to evaluate each of the mechanical functions for the Clamps Activation, Head Lift and the Blade Cartridge Plunge for troubleshooting.
The ECU/Driver Pack controls the electrical functions of the Clamps Activation, Head Lift and the Blade Cartridge Plunge.
Troubleshooting:
Q: The Clamps are not engaging:
Check the Air Compressor and make sure it is on.
Check the Air Lines to make sure they are not kinked.
For the Z Series, see if the Mat Clamp Pressure Knob on the Control Panel is set to the low setting.
For the Z Series, make sure the Clamp Pressure Adjustment on the Control Panel isn’t set too low.
Check the ECU/Driver Pack connections into the back of the Control Panel, Gantry and the Computer and make sure they are tight.
Turn off the ECU/Driver Pack and close the software.
Turn on the ECU/Driver Pack and restart the software.
Check the Clamp Actuator Valve in the Air Valve Assembly located in the Gantry.
The Air Valve Assembly may need to be replaced.
Q: The Head is not Lifting/Lowering to the Board:
Make sure the VPO on the Head is not set too low.
Check the Head Lift Actuator Valve in the Air Valve Assembly located in the Gantry; the Air Valve Assembly may need to be replaced.
Q: The Blade Cartridge is not Plunging:
For the Z Series, make sure that the pressure for the Variable Pressure Optimization on the Head has not been turned down too far.
Check the Blade Cartridge Plunge Actuator Valve in the Air Valve Assembly located in the Gantry; the Air Valve Assembly may need to be replaced.
Air Valve Assembly Test Buttons
Air Valve Assembly Documents
Clamp Definition
Driver Pack Definition
ECU Definition
Footblock Definition
Head Definition
