Versions Compared

Old Version 24

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Create a Starburst Design with CutArt

Info

  • This lesson shows how to Mirror a CutArt to create a Scrolled Starburst design.

Panel
panelIconId1f9d9-200d-2640-fe0f
panelIcon:woman_mage:
panelIconText🧙‍♀️
bgColor#FFEBE6
Expand
titleMirror Definition

The Mirror /wiki/spaces/FrameShop8x/pages/1942694450function will create a Mirror copy of the selected object along the selected axis in Trace andDesignerthe Design Editorand mirror the image horizontally in Visualize.

Image RemovedImage Added

See: Mirror in Trace Function

See: Mirror CutArt in Designerthe Design Editor

See: Mirror Image in Visualization

Expand
titleCutArt Definition

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

Image RemovedCutArtExample70800.pngImage Added

See: Add CutArt Function

Move the CutArt so that it is
Templatesare specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

Image Removed

See: Template Properties

See: Template Library

Design Template in FrameShop

Expand
titleTemplate Definition
Image Removed

  • Click on the Properties tab.

  • Click on the Parameters tab.

  • Change the No. of Points to 6.

  • Change the Spikiness to 0.

  • Change the Mode to 2. 

  • Change the Line Length to 2.85".

Expand
titleParameters Definition

The Parameters are set of specified variable characteristics related to the selected object that can be modified through the accompanying fields in Designer.

For example, the Chamfer is the symmetrical angled surface at the corner of the Template.

In Designer, the Template Parameter Map displays a diagram describing each parameter field for the current Template.

Image Removed
Image Removed

Place a CutArt in the Editor

Expand
titleCutArt Definition

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

Image Removed

See: Add CutArt Function

Image Removed

  • Select the desired CutArt by either searching for it in the search field or by navigating through the directories.

    • This example uses ScrollAN for the CutArt.

  • Click the Edit button.

Expand
titleCutArt Definition

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

Image Removed

See: Add CutArt Function

Image Removed

  • The CutArt is placed on the Editor.

Expand
titleCutArt Definition

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

Image Removed

See: Add CutArt Function

Image Removed

  • First we need to make sure we are designing the layers in the correct order for these instructions.

  • On the FrameShop Main Page, click Admin and stay on the Defaults tab.

  • Under Layer Direction select Bottom Up if it is not already set to that.

  • Click Save and return to the Main Page.

    • You can change this back to the original setting later if desired.

Panel
panelIconId1f9d9-200d-2640-fe0f
panelIcon:woman_mage:
panelIconText🧙‍♀️
bgColor#FFEBE6

  • Layer Direction: Bottom Up is the preferred direction.

    • When you Offset an object to create another layer, that new layer will be the Top layer.

  • Layer Direction: Top Down is not recommended.

    • When you Offset an object to create another layer, that new layer will be the Bottom layer, even though it is larger than the original object.

2LayerLetterMatDefaultDirection800.pngImage Added
Expand
titleTemplate Definition

Templatesare specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

Image Added

See: Template Properties

See: Template Library

Image Added

  • Click on the Properties tab.

  • Click on the Parameters tab.

  • Change the No. of Points to 6.

  • Change the Spikiness to 0.

  • Change the Mode to 2. 

  • Change the Line Length to 2.85".

Expand
titleParameters Definition

The Parameters are set of specified variable characteristics related to the selected object that can be modified through the accompanying fields in the Design Editor.

For example, the Chamfer is the symmetrical angled surface at the corner of the Template.

In the Design Editor, the Template Parameter Map displays a diagram describing each parameter field for the current Template.

Image Added
Image Added

Place a CutArt in the Editor

Image Added

  • Select the desired CutArt by either searching for it in the search field or by navigating through the directories.

    • This example uses ScrollAN for the CutArt.

  • Click the Edit button.

Image Added

  • The CutArt is placed on the Editor.

Image Added

  • Move the CutArt so that it is aligned with the Top of the Star Template.

  • If you accidentally click off of the CutArt and it moves behind the Star, hit the PgUp/PgDn key to cycle through the Openings.

Expand
titleCutArt Template Definition

CutArt™ are simple shapes and design elements Templatesare specialized parametric shape generators created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

Image Removed

See: Add CutArt Function

Expand
titleTemplate Definition

Templatesare specialized parametric shape generators created by Wizard.Many of the templates have additional Properties that can be edited which can Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

See: Template Properties

See: Template Library

Bring Design into Trace

Expand
titleCutArt Template Definition

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

Image Removed

See: Add CutArt Function

Expand
titleTemplate Definition

Templatesare specialized parametric shape Templatesare specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

See: Template Properties

See: Template Library

Draw Alignment Lines

Info

  • We will add some Alignment Lines that we will use to Mirror the CutArt.

  • You can Mirror the CutArt without the Alignment Lines, but adding them will help illustrate the process.

  • Click the Line button on the Trace and Draw tab. The Draw radio button is automatically selected.

  • Right-Click on the Center Point of one of the Lines of the Polygon.

Expand
titleLine Definition

The Line /wiki/spaces/FrameShop8x/pages/1942694019tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).

After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc /wiki/spaces/FrameShop8x/pages/1942509136.

See: Line Tool Function

Expand
titleMirror Definition

The Mirror /wiki/spaces/FrameShop8x/pages/1942694450function will create a Mirror copy of the selected object along the selected axis in Trace andDesignerthe Design Editorand mirror the image horizontally in Visualize.

Image RemovedImage Added

See: Mirror in Trace Function

See: Mirror CutArt in Designerthe Design Editor

See: Mirror Image in Visualization

  • Right-Click on the Center Point of the opposite Line of the Polygon.

Info

  • The Line is placed.

Expand
titleLine Definition

The Line /wiki/spaces/FrameShop8x/pages/1942694019tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).

After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc /wiki/spaces/FrameShop8x/pages/1942509136.

See: Line Tool Function

  • Do the same with the other sides of the Polygon, Right-Clicking and Snapping to the Center Point then Snapping to the Center Point on the opposite Point.

Expand
titleLine Definition

The Line /wiki/spaces/FrameShop8x/pages/1942694019tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).

After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc /wiki/spaces/FrameShop8x/pages/1942509136.

See: Line Tool Function

  • Hold down the CTRL key and select the elements of the next CutArt.

  • Click the Mirror button.

  • Right-Click at each end of the Alignment Line.

Mirror the CutArt

  • Click on the Edit radio button.

  • Hold down the CTRL key and click on both the Inner and the Outside of the CutArt.

  • Click the Mirror button.

The Mirror 
Expand
Expand
titleMirror Definition
titleCutArt Definition

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

Image Removed

See: Add CutArt Function

Mirror Definition

The Mirror/wiki/spaces/FrameShop8x/pages/1942694450function will create a Mirror copy of the selected object along the selected axis in Trace andDesignerthe Design Editorand mirror the image horizontally in Visualize.

Image RemovedImage Added

See: Mirror in Trace Function

See: Mirror CutArt in Designerthe Design Editor

See: Mirror Image in Visualization

  • Right-Click on the point where the Upper Left Line begins.

  • Right-Click on the end of the Line at the Lower Right side.

Info

  • The CutArt has been Mirrored using the Line we drew as the axis.

Expand
titleLine Definition

The Line /wiki/spaces/FrameShop8x/pages/1942694019tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).

After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc /wiki/spaces/FrameShop8x/pages/1942509136.

See: Line Tool Function

The Mirror function will create
Expand
Expand
titleMirror Definition
titleCutArt Definition

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

Image Removed

See: Add CutArt Function

Mirror Definition

The Mirror/wiki/spaces/FrameShop8x/pages/1942694450function will create a Mirror copy of the selected object along the selected axis in Trace andthe Design Editorand mirror the image horizontally in Visualize.

Image AddedImage Added

See: Mirror in Trace Function

See: Mirror CutArt in the Design Editor

See: Mirror Image in Visualization

Image Added

  • Hold down the CTRL key and select the elements of the next CutArt.

  • Click the Mirror button.

  • Right-Click at each end of the Alignment Line.

Expand
titleMirror Definition

The Mirror/wiki/spaces/FrameShop8x/pages/1942694450function will create a Mirror copy of the selected object along the selected axis in Trace andDesignerthe Design Editorand mirror the image horizontally in Visualize.

Image RemovedImage Added

See: Mirror in Trace Function

See: Mirror CutArt in Designerthe Design Editor

See: Mirror Image in Visualization

Image Removed
Expand
titleCutArt Definition

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

Image Removed

See: Add CutArt Function

Expand
titleMirror Definition
The Mirror function will create a Mirror copy of the selected object along the selected axis in Trace andDesignerand mirror the image horizontally in Visualize.Image RemovedImage Removed

See: Mirror in Trace Function

See: Mirror CutArt in Designer

See: Mirror Image in Visualization

Image Removed

  • The CutArt as been Mirrored using the Line we drew as the axis.

Expand
titleCutArt Definition

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

Image Removed

See: Add CutArt Function

Expand
titleMirror Definition
The Mirror Image Added

  • The CutArt as been Mirrored using the Line we drew as the axis.

Expand
titleMirror Definition

The Mirror/wiki/spaces/FrameShop8x/pages/1942694450function will create a Mirror copy of the selected object along the selected axis in Trace andthe Design Editorand mirror the image horizontally in Visualize.

Image AddedImage Added

See: Mirror in Trace Function

See: Mirror CutArt in the Design Editor

See: Mirror Image in Visualization

Expand
titleLine Definition

The Line/wiki/spaces/FrameShop8x/pages/1942694019tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).

After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an /wiki/spaces/FrameShop8x/pages/1942509136.

Image Added

See: Line Tool Function

Image Added

  • Repeat the process.

  • Select all of the Objects of the next CutArt, click the Mirror button, then Snap to each end of the Alignment Line.

Expand
titleMirror Definition

The Mirror/wiki/spaces/FrameShop8x/pages/1942694450function will create a Mirror copy of the selected object along the selected axis in Trace andDesignerthe Design Editorand mirror the image horizontally in Visualize.

Image RemovedImage Added

See: Mirror in Trace Function

See: Mirror CutArt in Designerthe Design Editor

See: Mirror Image in Visualization

Expand
titleLine Definition

The Line /wiki/spaces/FrameShop8x/pages/1942694019tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).

After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc /wiki/spaces/FrameShop8x/pages/1942509136.

See: Line Tool Function

Image Removed

  • Repeat the process.

    • Select all of the Objects of the next CutArt, click the Mirror button, then Snap to each end of the Alignment LineImage Added

    • The CutArt has been Mirrored all the way around the design.

    The Mirror 
    Expand
    Expand
    titleMirror Definition
    titleCutArt Definition

    CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

    CutArts can be applied to your current design and edited, such as resizing and rotating.

    They can be Cut, Debossed, Penned or cut on Vinyl.

    Image Removed

    See: Add CutArt Function

    Mirror Definition

    The Mirror/wiki/spaces/FrameShop8x/pages/1942694450function will create a Mirror copy of the selected object along the selected axis in Trace andDesignerthe Design Editorand mirror the image horizontally in Visualize.

    Image RemovedImage Added

    See: Mirror in Trace Function

    See: Mirror CutArt in Designerthe Design Editor

    See: Mirror Image in Visualization

    Image Added

    Break all Intersections

    Info

    • Now we want to Break All of the Intersections where the Lines and Arcs pass over the other Lines/Arcs.

    Expand
    title
    Line The Line
    Break Definition

    The Line tool in Trace will draw a Two-Point Line. 

    The Break Tool tool is used to Bisect the Selected Segments at the point where they Intersect in the Trace software.

    The Break All Intersections function bisects ALL Segments in the design where they intersect in the Trace software.

    Image Added

    See: Break All Intersections Function

    Expand
    titleLine Definition

    The Line/wiki/spaces/FrameShop8x/pages/1942694019tool in Trace will draw a Two-Point Line. 

    The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).

    After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an

    Arc
    Expand
    titleSpline Definition

    The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

    The Bezier/Spline Curve is defined by four points: Initial Position (called an Anchor), Two Separate Middle Points (called Handles) which can be moved to alter the shape, and the Terminating Position (called an Anchor)

    The Convert Arc to Splines process will convert any Arcs to Splines/Curves which are easier to tangify to make cuts smoother.

    Image Removed

    See: Arc Definition

    See: Arcs Tool Function

    See: Splines Definition

    See: Splines Tool Function

    See: Convert Arc to Splines Function

    Image Removed

    • The Intersections are now Broken where the objects crossed over each other.

    Expand
    titleBreak Definition

    The Break Tool tool is used to Bisect the Selected Segments at the point where they Intersect in the Trace software.

    The Break All Intersections function bisects ALL Segments in the design where they intersect in the Trace software.

    Image Removed

    See: Break All Intersections Function

    Image Removed

    Join Segments

    Info

    • We will now Join all of the segments that will make up the outside of the design.

    • Hold down the CTRL key and click on the Left Side of the Top CutArt.

    • Click on the Arcs just outside of the Polygon.

    • Click on the Right Side of the Top CutArt.

    Expand
    titleCutArt Definition

    CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

    CutArts can be applied to your current design and edited, such as resizing and rotating.

    They can be Cut, Debossed, Penned or cut on Vinyl.

    Image Removed

    See: Add CutArt Function

    Expandtitle

    /wiki/spaces/FrameShop8x/pages/1942509136.

    Image Modified

    See: Line Tool Function

    Image Removed

    • The CutArt has been Mirrored all the way around the design.

    Expand
    titleCutArt Definition

    CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

    CutArts can be applied to your current design and edited, such as resizing and rotating.

    They can be Cut, Debossed, Penned or cut on Vinyl.

    Image Removed

    See: Add CutArt Function

    Expand
    titleMirror Definition
    The Mirror function will create a Mirror copy of the selected object along the selected axis in Trace andDesignerand mirror the image horizontally in Visualize.Image RemovedImage Removed

    See: Mirror in Trace Function

    See: Mirror CutArt in Designer

    See: Mirror Image in Visualization

    Image Removed

    Break all Intersections

    Info

    • Now we want to Break All of the Intersections where the Lines and Arcs pass over the other Lines/Arcs.

    Expand
    titleBreak Definition

    The Break Tool tool is used to Bisect the Selected Segments at the point where they Intersect in the Trace software.

    The Break All Intersections function bisects ALL Segments in the design where they intersect in the Trace software.

    Image Removed

    See: Break All Intersections Function

    Expand
    titleLine Definition

    The Line tool in Trace will draw a Two-Point Line. 

    The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).

    After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc.

    Image Removed

    See: Line Tool Function

    Expand
    titleArc Definition
    The Arc tool allows you to draw athree-point mathematically defined arc in the Trace software.

    The Arc has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor).

    The Convert Arc to Splines process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.

    Image Removed

    See: Arc Tool in Trace

    See: Arc Tool Definition 

    See: Splines Definition

    See: Convert Arc to Splines Function

    Expand
    titleArc Definition

    The Arc tool allows you to draw athree-point mathematically defined arc in the Trace

    software.The Arc

    software.

    The /wiki/spaces/FrameShop8x/pages/1942694083 has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor).

    The

    Convert Arc to Splines

    /wiki/spaces/FrameShop8x/pages/1942692800 process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.

    Image Modified

    See: Arc Tool in Trace

    See: Arc Tool Definition

     

    /wiki/spaces/FrameShop8x/pages/1942694083

    See: Splines Definition

    See: Convert Arc to Splines Function

    Expand
    titleSpline Definition

    The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

    The Bezier/Spline Curve is defined by four points: Initial Position (called an Anchor), Two Separate Middle Points (called Handles) which can be moved to alter the shape, and the Terminating Position (called an Anchor)

    The Convert Arc to Splines process will convert

    any Arcs to Splines/Curves which are easier to tangify to make cuts smoother.Image Removed

    See: Arc Definition

    See: Arcs Tool Function

    See: Splines Definition

    See: Splines Tool Function

    See: Convert Arc to Splines Function

    Image RemovedContinue in this manner until you have selected all of the Elements that

    any Arcs to Splines/Curves which are easier to tangify to make cuts smoother.

    Image Added

    See: Arc Definition

    See: Arcs Tool Function

    See: Splines Definition

    See: Splines Tool Function

    See: Convert Arc to Splines Function

    		Image Added

    • The Intersections are now Broken where the objects crossed over each other.

    Expand
    titleBreak Definition

    The Break Tool tool is used to Bisect the Selected Segments at the point where they Intersect in the Trace software.

    The Break All Intersections function bisects ALL Segments in the design where they intersect in the Trace software.

    Image Added

    See: Break All Intersections Function

    		Image Added
    The segments are now Joined together as one object

    • on the Arcs just outside of the Polygon.

    • Click on the Right Side of the Top CutArt.

    Join Segments

    Info

    • We will now Join all of the segments that will make up the outside of the design.

    • Hold down the CTRL key and click on the Left Side of the Top CutArt.

    • Click the Join button.

    Info
    Expand
    titleJoin Arc Definition

    The Join button will connect the Selected Segments together as one object in Trace. 

    The Auto Join Segments button will automatically join All Adjacent Segments together in Trace.

    Image Removed

    See: Join Tool Function

    See: Auto Join Segments Function

    Image Removed

    • Zoom in to the Center of the design.

    • If you click on one of the Inner Openings, you will see that it is not a complete enclosed object since we Broke the Intersections where the Arcs crossed one another.

    • Click on one of the Inner Openings and click the Close button.

    Info

    • The Inner Openings is now an enclosed entity.

    Expand
    titleBreak Definition

    The Break Tool tool is used to Bisect the Selected Segments at the point where they Intersect in the Trace software.

    The Break All Intersections function bisects ALL Segments in the design where they intersect in the Trace software.

    Image Removed

    See: Break All Intersections Arc tool allows you to draw athree-point mathematically defined arc in the Trace software.

    The /wiki/spaces/FrameShop8x/pages/1942694083 has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor).

    The /wiki/spaces/FrameShop8x/pages/1942692800 process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.

    Image Added

    See: Arc Tool in Trace

    See: Arc Tool Definition/wiki/spaces/FrameShop8x/pages/1942694083

    See: Splines Definition

    See: Convert Arc to Splines Function

    Expand
    titleArc Spline Definition

    The Arc tool The Curve function allows you to draw a threefour-point mathematically defined arc Bezier/Spline Curve in the Trace software.The Arc has three

    The Bezier/Spline Curve is defined by four points: Initial Position (called an Anchor), Two Separate Middle Point Points (called a HandleHandles) which can be moved to change alter the shape of the Arc, and the Terminating Position (called an Anchor).

    The Convert Arc to Splines process will convert the any Arcs to Splines/Curves which are easier to tangify to make cuts smoother.

    Image RemovedImage Added

    See: Arc Definition

    See: Arcs Tool in Trace

    See: Arc Tool Definition 

    See: Splines Definition

    See: Convert Arc to Splines FunctionFunction

    See: Splines Definition

    See: Splines Tool Function

    See: Convert Arc to Splines Function

    Image Added

    • Continue in this manner until you have selected all of the Elements that make up the outside of the design.

    • Click the Join button.

    Info

    • The segments are now Joined together as one object.

  • Hold down the CTRL key and click on each inner Arc of the combined CutArts. 

    • Click the Join button.
    Expand
    titleSpline Join Definition

    The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

    The Bezier/Spline Curve is defined by four points:

    Initial Position (called an Anchor)

    Two Separate Middle Points (called Handles) which can be moved to alter the shape.

    Terminating Position (called an Anchor)

    Splines are easier to handle in the software than Arcs for tangification which makes the cuts smoother between arcs.

    The Convert Arc to Splines process will convert the Arcs to Splines for software simplification purposes.

    Arcs are provided for those that prefer to draw with them.

    Image Removed

    See: Arc Tool in Trace

    See: Arc Tool Definition 

    See: Splines Definition

    See: Convert Arc to Splines Function

    Image Removed

    • Do the same with the other Inner Openings to enclose them one at a time (highlighted here). 

    Image Removed

    The Join button will connect the Selected Segments together as one object in Trace. 

    The Auto Join Segments button will automatically join All Adjacent Segments together in Trace.

    Image Added

    See: Join Tool Function

    See: Auto Join Segments Function

    Image Added

    • Zoom in to the Center of the design.

    • If you click on one of the Inner Openings, you will see that it is not a complete enclosed object since we Broke the Intersections where the Arcs crossed one another.

    • Click on one of the Inner Openings and click the Close button.

    Info

    • The Inner Openings is now an enclosed entity.

    Expand
    titleBreak Definition

    The Break Tool tool is used to Bisect the Selected Segments at the point where they Intersect in the Trace software.

    The Break All Intersections function bisects ALL Segments in the design where they intersect in the Trace software.

    Image Added

    See: Break All Intersections Function

    Expand
    titleArc Definition

    The Arc tool allows you to draw athree-point mathematically defined arc in the Trace software.

    The Arc /wiki/spaces/FrameShop8x/pages/1942694083 has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor).

    The Convert Arc to Splines /wiki/spaces/FrameShop8x/pages/1942692800 process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.

    See: Arc Tool in Trace

    See: Arc Tool Definition Arc Tool Definition/wiki/spaces/FrameShop8x/pages/1942694083

    See: Splines Definition

    See: Convert Arc to Splines Function

    • The Arcs are now Joined together as one object.

    Expand
    titleSpline Definition

    The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

    The Bezier/Spline Curve is defined by four points:

    Initial Position (called an Anchor)

    Two Separate Middle Points (called Handles) which can be moved to alter the shape.

    Terminating Position (called an Anchor)

    Splines are easier to handle in the software than Arcs for tangification which makes the cuts smoother between arcs.

    The Convert Arc to Splines process will convert the Arcs to Splines for software simplification purposes.

    Arcs are provided for those that prefer to draw with them.

    See: Arc Tool in Trace

    See: Arc Tool Definition 

    See: Splines Definition

    See: Convert Arc to Splines Function

    Expand
    titleCutArt Definition

    CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

    CutArts can be applied to your current design and edited, such as resizing and rotating.

    They can be Cut, Debossed, Penned or cut on Vinyl.

    Image Removed

    See: Add CutArt Function

    Expand
    titleJoin Definition

    The Join button will connect the Selected Segments together as one object in Trace. 

    The Auto Join Segments button will automatically join All Adjacent Segments together in Trace.

    Image Removed

    See: Join Tool Function

    See: Auto Join Segments Function

    Image Removed

    /wiki/spaces/FrameShop8x/pages/1942694083

    See: Splines Definition

    See: Convert Arc to Splines Function

    Image Added

    • Do the same with the other Inner Openings to enclose them one at a time (highlighted here). 

    Image Added

    • Hold down the CTRL key and click on each inner Arc of the combined CutArts. 

    • Click the Join button.

    Expand
    titleArc Definition

    The Arc tool allows you to draw athree-point mathematically defined arc in the Trace software.

    The Arc /wiki/spaces/FrameShop8x/pages/1942694083 has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor).

    The Convert Arc to Splines /wiki/spaces/FrameShop8x/pages/1942692800 process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.

    See: Arc Tool in Trace

    See: Arc Tool Definition Definition/wiki/spaces/FrameShop8x/pages/1942694083

    See: Splines Definition

    See: Convert Arc to Splines Function

    Expand
    titleSpline Definition

    The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

    The Bezier/Spline Curve is defined by four points:

    Initial Position (called an Anchor)

    Two Separate Middle Points (called Handles) which can be moved to alter the shape.

    Terminating Position (called an Anchor)

    Splines are easier to handle in the software than Arcs for tangification which makes the cuts smoother between arcs.

    The Convert Arc to Splines process will convert the Arcs to Splines for software simplification purposes.

    Arcs are provided for those that prefer to draw with them.

    See: Arc Tool in Trace

    See: Arc Tool Definition /wiki/spaces/FrameShop8x/pages/1942694083

    See: Splines Definition

    See: Convert Arc to Splines Function

    Expand
    titleJoin Definition

    The Join button will connect the Selected Segments together as one object in Trace. 

    The Auto Join Segments button will automatically join All Adjacent Segments together in Trace.

    See: Join Tool Function

    See: Auto Join Segments Function

    Image Removed

    Convert to Splines/Tangify

    Panel
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6
    Expand
    titleConvert Arc to Splines
    The Convert Arc to Splines
    Image Added

    • The Arcs are now Joined together as one object.

    Expand
    titleArc Definition

    The Arc tool allows you to draw athree-point mathematically defined arc in the Trace software.

    The /wiki/spaces/FrameShop8x/pages/1942694083 has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor).

    The /wiki/spaces/FrameShop8x/pages/1942692800 process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.

    Image Removed
    Image Added

    See:

    Arcs Definition

    Arc Tool in Trace

    See:

    Arcs Tool Function

    Arc Tool Definition/wiki/spaces/FrameShop8x/pages/1942694083

    See: Splines Definition

    See: Splines Tool Function

    See: Convert Arc to Splines Function

    Expand
    title
    Arc
    Spline Definition
    The Arc tool 

    The Curve function allows you to draw a

    three

    four-point mathematically defined

    arc

    Bezier/Spline Curve in the Trace software.

    The

    Arc has three

    Bezier/Spline Curve is defined by four points:

    Initial Position (called an Anchor)

    ,

    Two Separate Middle

    Point

    Points (called

    a Handle

    Handles) which can be moved to

    change

    alter the shape

    of the Arc, and Terminating Position (called an Anchor)

    .

    Terminating Position (called an Anchor)

    Splines are easier to handle in the software than Arcs for tangification which makes the cuts smoother between arcs.

    The Convert Arc to Splines process will convert the Arcs to Splines

    which are easier to tangify to make cuts smoother.Image Removed

    for software simplification purposes.

    Arcs are provided for those that prefer to draw with them.

    Image Added

    See: Arc Tool in Trace

    See: Arc Tool Definition

      Expand
    titleTangify Definition

    The Tangify function will smooth the connection between the Selected Arc Circuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs. 

    The Tangify All Circuits will smooth the connection between All of the ArcCircuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs. Image Removed

    See: Tangify Function

    See: Tangify All Circuits Function

    See: Arc Tool in Trace

    See: Arc Tool Definition 

    See: Splines Definition

    /wiki/spaces/FrameShop8x/pages/1942694083

    See: Splines Definition

    See: Convert Arc to Splines Function

    Expand
    title
    Spline Definition

    The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

    The Bezier/Spline Curve is defined by four points: Initial Position (called an Anchor), Two Separate Middle Points (called Handles) which can be moved to alter the shape, and the Terminating Position (called an Anchor)

    The Convert Arc to Splines process will convert any Arcs to Splines/Curves which are easier to tangify to make cuts smoother.

    Image Removed

    See: Arc Definition

    See: Arcs Tool Function

    See: Splines Definition

    See: Splines Tool Function

    See: Convert Arc to Splines Function

    Join Definition

    The Join button will connect the Selected Segments together as one object in Trace. 

    The Auto Join Segments button will automatically join All Adjacent Segments together in Trace.

    Image Added

    See: Join Tool Function

    See: Auto Join Segments Function

    		Image Added
    See: Add CutArt Function

    Convert to Splines/Tangify

    Panel
    panelIconId1f9d9-200d-2642-fe0f
    panelIcon:man_mage:
    panelIconText🧙‍♂️
    bgColor#FFFAE6
    Expand
    titleConvert Arc to Splines

    The Convert Arc to Splines process will convert the Arcs to /wiki/spaces/FrameShop8x/pages/1942513851 which are easier to tangify to make cuts smoother.

    Image Added

    See: Arcs Definition

    See: Arcs Tool Function

    See: Splines Definition

    See: Splines Tool Function

    See: Convert Arc to Splines Function

    		Image RemovedImage Removed

    Trace the Design

    • Click the Set Bevels tab.  

    • Hold down the CTRL key and click on each segment that makes up the CutArt.

    • From the Deboss dropdown control, selected the desired Deboss Cartridge.

    Expand
    titleBevel Type Definition

    The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

    Image Removed
    Expand
    titleTraced Definition

    Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

    The Set Bevels Tab in Trace contains the tools needed to Trace the design.

    Image Removed

    See: Tracing the Design

    Expand
    titleDeboss Definition

    The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

    There are three Deboss stylus sizes: Wide, Medium, Thin.

    In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs.

    Image RemovedImage Removed

    See: Add Deboss Opening Function

    See: Deboss Configurations

    See: Deboss Thin Definition

    See: Deboss Medium Definition

    See: Deboss Wide Definition

    Image Removed
    Expand
    titleDeboss Definition

    The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

    There are three Deboss stylus sizes: Wide, Medium, Thin.

    In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs.

    Image RemovedImage Removed

    See: Add Deboss Opening Function

    See: Deboss Configurations

    See: Deboss Thin Definition

    See: Deboss Medium Definition

    See: Deboss Wide Definition

    Image Removed

    • The CutArt is traced as a Deboss.

    Expand
    titleCutArt Definition

    CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

    CutArts can be applied to your current design and edited, such as resizing and rotating.

    They can be Cut, Debossed, Penned or cut on Vinyl.

    Image Removed

    Expand
    titleArc Definition

    The Arc tool allows you to draw athree-point mathematically defined arc in the Trace software.

    The /wiki/spaces/FrameShop8x/pages/1942694083 has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor).

    The /wiki/spaces/FrameShop8x/pages/1942692800 process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.

    Image Added

    See: Arc Tool in Trace

    See: Arc Tool Definition/wiki/spaces/FrameShop8x/pages/1942694083

    See: Splines Definition

    See: Convert Arc to Splines Function

    Expand
    titleSpline Definition

    The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

    The Bezier/Spline Curve is defined by four points: Initial Position (called an Anchor), Two Separate Middle Points (called Handles) which can be moved to alter the shape, and the Terminating Position (called an Anchor)

    The Convert Arc to Splines process will convert any Arcs to Splines/Curves which are easier to tangify to make cuts smoother.

    Image Added

    See: Arc Definition

    See: Arcs Tool Function

    See: Splines Definition

    See: Splines Tool Function

    See: Convert Arc to Splines Function

    Expand
    titleTangify Definition

    The Tangify function will smooth the connection between the Selected Arc Circuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs. 

    The Tangify All Circuits will smooth the connection between All of the ArcCircuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs. 

    Image Added

    See: Tangify Function

    See: Tangify All Circuits Function

    See: Arc Tool in Trace

    See: Arc Tool Definition/wiki/spaces/FrameShop8x/pages/1942694083

    See: Splines Definition

    See: Convert Arc to Splines Function

    		Image AddedImage Added

    Trace the Design

    • Click the Set Bevels tab.  

    • Hold down the CTRL key and click on each segment that makes up the CutArt.

    • From the Deboss dropdown control, select the desired Deboss Cartridge.

    • Click on the Deboss Set button.

    Expand
    titleTraced Definition

    Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

    The Set Bevels Tab in Trace contains the tools needed to Trace the design.

    Image Added

    See: Tracing the Design

    Expand
    titleDeboss Definition

    The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

    There are three Deboss stylus sizes: Wide, Medium, Thin.

    In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs.

    Image RemovedDebossingImagesCartridges70800.pngImage Added

    See: Add Deboss Opening Function

    See: Deboss Configurations

    See: Deboss Thin Definition

    See: Deboss Medium Definition

    See: Deboss Wide Definition: Deboss Wide Definition

    		Image Added

    • The CutArt is traced as a Deboss.

    Rotate the CutArt

    Info

    • Now we want to Rotate the CutArt to be more symmetrically balanced. Select one of the two choices below to continue this lesson:

    Expand
    titleRotate in Trace Definition

    The Rotationfunction in Traceis the action of rotating the selected object(s) around an axis or center by the specified number of degrees.

    See: Rotate in Trace Function.

    Expand
    titleRotate in Designer Definition

    The Rotation function in Designer the Design Editor is the action of rotating the selected object(s) around an axis or center by the specified number of degrees.

    See: Rotation in Designer Function

    Expand
    titleCutArt Definition

    CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

    CutArts can be applied to your current design and edited, such as resizing and rotating.

    They can be Cut, Debossed, Penned or cut on Vinyl.

    Image Removed

    See: Add CutArt the Design Editor Function