Tangify All Circuits: Trace
- dani.simmonds
Tangify All Circuits | |
|---|---|
The Tangify function will smooth the connection between the Selected Arc Circuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs. The Tangify All Circuits will smooth the connection between All of the Arc Circuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs.  Exaggerated Tangify Example See: Tangify Function See: Tangify All Circuits Function See: Arc Tool in Trace See: Arc Tool Definition See: Splines Definition The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software. The Bezier/Spline Curve is defined by four points: Initial Position (called an Anchor), Two Separate Middle Points (called Handles) which can be moved to alter the shape, and the Terminating Position (called an Anchor) The Convert Arc to Splines process will convert any Arcs to Splines which are easier to tangify to make cuts smoother.  The Curve Button Creates a Bezier Curve See: Curve Tool Function in Trace The Arc tool allows you to draw a three-point mathematically defined arc in the Trace software. The Arc has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor). The Convert Arc to Splines process will convert the Arcs to Splines which are easier to tangify to make cuts smoother. See: Arc Tool in Trace See: Arc Tool Definition See: Splines Definition | |
Tangifying All Circuits | |
|---|---|
The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software. The Bezier/Spline Curve is defined by four points: Initial Position (called an Anchor), Two Separate Middle Points (called Handles) which can be moved to alter the shape, and the Terminating Position (called an Anchor) The Convert Arc to Splines process will convert any Arcs to Splines which are easier to tangify to make cuts smoother. See: Curve Tool Function in Trace The Arc tool allows you to draw a three-point mathematically defined arc in the Trace software. The Arc has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor). The Convert Arc to Splines process will convert the Arcs to Splines which are easier to tangify to make cuts smoother. See: Arc Tool in Trace See: Arc Tool Definition See: Splines Definition | |
Tangify Selected Objects | |
|---|---|