ECU Driver Installation: FrameShop: CMC 8000 Series, 9000 and the Z Series

The drivers for the ECU must be installed on the Computerized Mat Cutter (CMC) computer. The drivers will install two parts. The first part installs the drivers for the ECU, and the second part installs the firmware for the ECU. If both parts are not installed, the ECU may not function properly.
Turn off the ECU.	Turn off the ECU
Unplug the USB Cable from the ECU. It is necessary to turn off and unplug the ECU, otherwise the ECU memory will not clear and the drivers installation will NOT take full effect.	Unplug the USB Cable from the ECU

Knowledge Base