Click here to check out our new How To section

Cutting from the Front Configurations

Owned by dani.simmonds
Last updated: Nov 11, 2024
1 min read

Cutting from the Front Configurations

Cutting from the Front Configurations

  • There is a separate bevel type configuration for cutting from the Front and cutting from the Back. 

  • Select the desired bevel type from the Front.

  • Configurations cut from the Front will display the bevel type name with a Front label; i.e., Normal Bevel - Front of Mat.

Cut Side Specifications in the Configurations
BevelOpening70800.png
Select the Correct Bevel Type and Whether the Cut is From the Front or Back. This Example is From the Front.
Cut From Front Configurations

Â