Click here to check out our new How To section

Cutting from the Back Configurations

Owned by dani.simmonds
Last updated: Nov 11, 2024
1 min read

Cutting from the Back Configurations

Cutting from the Back Configurations

  • There is a separate bevel type configuration for cutting from the Front and cutting from the Back. 

  • Select the desired bevel type from the Back.

  • Configurations cut from the Back will only display the bevel type name with no further label; i.e., Normal Bevel.

Cut Side Specifications in the Configurations
BackOfMatOpening70800.png
Select the Correct Bevel Type and Whether the Cut is From the Front or Back. This Example is From the Back.
Normal Bevel Cut From Back