Click here to check out our new How To section

Cutting from the Front Configurations

Owned by dani.simmonds
Last updated: Oct 30, 2024
1 min read

Cutting from the Front Configurations

Cutting from the Front Configurations

  • There is a separate bevel type configuration for cutting from the Front and cutting from the Back. 

  • Select the desired bevel type from the Front.

  • Configurations cut from the Front will display the bevel type name with a Front label; i.e., Normal Bevel - Front of Mat.

BevelOpening70800.png
Select the Correct Bevel Type and Whether the Cut is From the Front or Back. This Example is From the Front.
Cut From Front Configurations

Â