Rotation on Non-Oval V-Groove: FrameShop Configurations Screen

Select the Portion of the Non-Oval V-Groove you wish to Edit:

Select the Portion of the Non-Oval V-Groove you wish to Edit:

V-Groove Outside Rotation

The Outside Rotation field controls how much the foot block will rotate before cutting.

The outside cuts of the V-Groove are exterior cuts, and cut into the matboard and not the V-Groove fallout. They cut on the second pass of the V-Groove, and are cut in a counterclockwise direction.

See V-Groove Outside Rotation for information on how to adjust for this.

Outside Rotation Adjusts for Swoops or Flares in the Corners on the Outside Cut of a Non-Oval V-Groove

V-Groove Inside Rotation

The Inside Rotation field controls how much the foot block will rotate before cutting.

The inside cuts of the V-Groove are interior cuts, and cut into the V-Groove fallout and not the matboard. They cut on the first pass of the V-Groove, and are cut in a clockwise direction.

See V-Groove Inside Rotation for information on how to adjust for this.

Inside Rotation Adjusts for Swoops or Flares in the Corners on the Inside Cut of a Non-Oval V-Groove

Rotation on Non-Oval V-Groove

Rotation on Non-Oval V-Groove
The Rotation field controls how much the foot block will rotate before cutting. Adjust the Rotation if you are getting Swoops or Flares in the corners on a non-oval V-Groove.