Bevel Type: Specialty Cartridge Selection: Trace

Specialty Bevel Type Selection

Specialty Bevel Type Selection

Select the desired Specialty cartridge from the dropdown control.
- Pen: Uses the Pen tool.
- Deboss: Uses the Deboss tool.
- Vinyl: Uses the Vinyl tool to cut designs out of vinyl.
- Crease: Uses the Crease tool to crease the surface for folding, such as when cutting boxes.

A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.

Cut Example and Cartridge with Blade

The Pen Cartridge is used to draw onto the surface of the matboard on the CMC to create a design.

You can Pen Designs, CutArts, LetterMats and TTFs.

Pen Cartridge Example

See: Pen Cartridge Configurations

The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs.

See: Add Deboss Opening Function

See: Deboss Configurations

See: Deboss Thin Definition

See: Deboss Medium Definition

See: Deboss Wide Definition

The Vinyl Cartridge uses a special blade to cut the Vinyl which has been temporarily adhered to matboard to create the design.

See: Vinyl Cartridge Configurations

The Crease Cartridge is used to apply Crease marks that are used to assist in folding the thicker finished Box.

See: Add Crease Opening Function

See: Crease Cartridge Configurations