Tool Line Too Far Down Vertically
Tool Line Too Far Down Vertically | |
---|---|
The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges. If the Non-Blade Tool line is applied Too Far Up Vertically, Decrease the Vertical Adjustment. If the Non-Blade Tool line is applied Too Far Down Vertically, Increase the Vertical Adjustment. Adjust the Vertical Adjustment if the Tool Line is Applied in the Wrong Place Vertically Vertical Adjustment Configurations When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |