Check out our new How To section at: How To...

Crease has a Flare

Owned by dani.simmonds
Aug 16, 2024
2 min read

Crease has a Flare

Crease has a Flare

  • If the Crease has a Flare, Decrease the Rotation.

  • For Additional Information: See Troubleshooting Utility for information on adjusting for a Swoop or Flare in a Non-Oval.

A Flare in a Crease is where the corners Curve Away from the crease.

If the Crease has a Flare, Decrease the Rotation.

The Rotation controls for Swoops and Flares in Openings.

Cut Flares Away on the Crease Opening
Rotation for Crease

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.