/
Blade Depth: Hardware

Blade Depth: Hardware

Owned by dani.simmonds
Last updated: Feb 20, 2025
1 min read

  • If the current Layer uses a different Blade Cartridge or is a different Mat Thickness than the last layer cut, the user will be prompted to change the Cartridge and/or the Blade Depth. 

  • On the CMC Z1, setting the Blade Depth in the software will automatically set the Blade Depth in the hardware.

  • The Z1 will automatically adjust the physical Blade Depth of the CMC to this value when you click Continue.

  • Click Continue to cut.

User Will be prompted to Change the Cartridge and/or the Blade Depth

  • Turn the Blade Depth knob on the Head to the requested Blade Depth. The software Blade Depth and the hardware Blade Depth value should match.

  • Click Continue to cut.

Adjust the Blade Depth Dial to the Appropriate Depth

Related content

Changing the Blade Depth: FrameShop Cut Preview Screen
Changing the Blade Depth: FrameShop Cut Preview Screen
FrameShop 4x
More like this
Blade Depth: Software
Blade Depth: Software
FrameShop 7x
More like this
Measuring the Blade Depth: CMC Z1
Measuring the Blade Depth: CMC Z1
Knowledge Base
More like this
Blade Depth Dial Calibration: CMC 9000 and the Z(9000z)
Blade Depth Dial Calibration: CMC 9000 and the Z(9000z)
Knowledge Base
More like this
Measuring the Blade Depth: All Current CMC Models Except the Z1
Measuring the Blade Depth: All Current CMC Models Except the Z1
Knowledge Base
More like this