Check out our new How To section at: How To...

Line Design Details

Owned by dani.simmonds
Last updated: May 03, 2024
4 min read

Line Design Details

Line Design Details

  • Click on a Line to see the specific details about it. 

  • For Additional Information:

  • See Line Tool for drawing a Line.

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).

After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc.

Drawing a Line
Select a Line

  • The Design Details section displays information about the selected line.

Design Line Details

Design Line Details

Start X and Start Y

The X Position field is used to set or display the Horizontal position of the selected object in Designer, Trace and the Cut Preview. 

The Y Position field is used to set or display the Vertical position of the selected object in Designer, Trace and the Cut Preview. 

Mid X and Mid Y 

The X Position field is used to set or display the Horizontal position of the selected object in Designer, Trace and the Cut Preview. 

 

The Y Position field is used to set or display the Vertical position of the selected object in Designer, Trace and the Cut Preview. 

 

End X and End Y 

Angle 

Length 

Bevel Type 

Layer