/
Change to the Pen Cartridge

Change to the Pen Cartridge

  • The Pen cartridge is black and is labeled in the software with a pen icon.

The Pen Cartridge Icon
  • Make sure the Head and Footblock are already in the Aligned position.

  • Click the Align Head button if necessary. 

  • Push the blade cartridge release lever to eject the current cartridge.

Push the Blade Cartridge Release Lever Down to Eject the Current Cartridge
  • Place the pen tool cartridge into the head. 

  • The pen holder should be to the right, with the pen tip facing toward the CMC and the pen cartridge locking screw on the top, until it clicks into place. It can only be inserted one way.

  • If the pen is not going to be used for a while, please remove it from the pen holder and replace the pen cap to keep the pen from drying out.

 

Related content

Change to the Pen Cartridge: CMC 9000 and the Z Series
Change to the Pen Cartridge: CMC 9000 and the Z Series
More like this
Changing the Pen in the Pen Cartridge
Changing the Pen in the Pen Cartridge
More like this
Changing the Pen in the Pen Tool Cartridge: CMC Z1, Z (9000z) and 9000
Changing the Pen in the Pen Tool Cartridge: CMC Z1, Z (9000z) and 9000
More like this
Install Pen: Set the Pen Tool Cartridge Depth Setting on the CMC Z1
Install Pen: Set the Pen Tool Cartridge Depth Setting on the CMC Z1
More like this
Install Pen: Set the Pen Tool Cartridge Depth Setting on the CMC Z (9000z) and 9000
Install Pen: Set the Pen Tool Cartridge Depth Setting on the CMC Z (9000z) and 9000
More like this