Check out our new How To section at: How To...

Oval Rotation on Oval V-Grooves

Owned by dani.simmonds
Last updated: Aug 16, 2024
6 min read

Oval Rotation on Oval V-Grooves

Oval Rotation on Oval V-Grooves

Because this is an Oval V-Groove, you will be using either the Outside Oval Rotation or the Inside Oval Rotation, based on which V-Groove oval line you are editing.

  • If the Outside cut of the Oval V-Groove has a Feather, Increase the Outside Oval Rotation.

  • If the Outside cut of the Oval V-Groove cuts with a Bump, Decrease the Outside Oval Rotation.

  • If the Inside cut of the Oval V-Groove has a Feather, Decrease the Inside Oval Rotation.

  • If the Inside cut of the Oval V-Groove cuts with a Bump, Increase the Inside Oval Rotation.

Contents:

Select desired Cartridge Tab. 

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Outside Oval Rotation Field
Feather and Bump in Outside V-Groove