Select the Configurations Cartridge Type to Edit
Select the Cartridge Type Tab to Edit | |
---|---|
A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool. Cut Example and Cartridge with Blade Cutting from the Front will cut with the face of the mat toward the operator, and can be selected on the Cutting Preview.
If you are cutting an element that must be applied to the front of the mat, such as a V-Groove or Pen design, any openings on that layer will also cut from the front and use the Front of Mat configuration item; i.e., Normal Bevel-Front of Mat. So if you are having problems with a Normal Bevel cut on the same layer as a V-Groove, make sure you select Normal Bevel-Front of Mat to edit the configurations for that opening.  | |
45 Degree Cartridge
The 45° Cartridge cuts the matboard surface with the blade angled at 45°. This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The Bevel Type determines the initial blade plunge position. Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration. See: 45 Degree Normal Bevel Opening Definition See: 45 Degree Reverse Bevel Opening Definition See: 45 Degree Normal Bevel Drop Definition See: 45 Degree Reverse Bevel Drop Definition See: 45 Degree Outside Definition See: 45 Degree Normal Bevel Closed V-Groove Definition The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. | |
45 Degree Plus CartridgeÂ
The 45°+ Cartridge cuts the matboard surface with the blade angled at 45°. This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The Bevel Type determines the initial blade plunge position. Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration. See: 45 Degree Plus Normal Bevel Opening Definition See: 45 Degree Plus Reverse Bevel Opening Definition See: 45 Degree Plus Normal Bevel Drop Definition See: 45 Degree Plus Reverse Bevel Drop Definition See: 45 Degree Plus Outside Definition See: 45 Degree Plus Normal Bevel Closed V-Groove Definition | |
45 Degree Front Cartridge | |
52 Degree Cartridge | |
90 Degree Cartridge | |
Deboss Cartridges | |
Pen Cartridge | |
Vinyl Cartridge | |
Crease Cartridge |