This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Add Designs From Browse: FrameShop Nesting Editor
Add Designs | |
---|---|
Add Designs allows you to load saved designs into the current Nesting layout. | |
Click Designs > Add to open the Add Designs screen. | |
Hold down the CTRL key and click to select each design desired. | |
See Design Thumbnails to see how to view the design thumbnails instead of the design name. | |
Click OK. Select the desired quantities to load in the Select Design Quantities screen. Click OK. | |
The designs are loaded into Nesting, stacked on top of each other in the lower left corner.  NOTE: A maximum of only six layers/SKUs is available. When you load a design containing SKUs, each SKU will be assigned to a layer. Therefore, if you load a combination of mats that contain more than six different SKUs, you will have to reduce the number of designs loaded until only six layers/SKUs maximum is loaded. See Unable to Add One or More Design Layers for more information. | |
Click on the background to unselect the group of openings then click and drag each opening to arrange the designs as desired.  | |
Each design is labeled with the design name. | |
Remember to move the openings on the other layers as well. Optionally, Sync the Layers Across Sheets. |