This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw


Rotation: FrameShop Configurations Screen

Rotation

Rotation

Adjust the Rotation if you are getting Swoops or Flares in the corners on a non-oval opening.

Rotation Adjusts for Swoops or Flares in the Corners on a Non-Oval Opening

Select the Bevel Type to be Edited:

Select the Bevel Type to be Edited:

Rotation for Openings

Select this topic to see information on editing��the Rotation on openings.

Rotation Adjusts for Swoops or Flares in the Corners on a Non-Oval Opening

Rotation for Drops

Select this topic to see information on editing the Rotation on drops.

Rotation for the Outside

Select this topic to see information on editing the Rotation on outside cuts.

Rotation for Non-Oval V-Grooves

Select this topic to see information on editing the Rotation on Non-Oval V-Grooves.

Rotation for Crease Objects

Select this topic to see information on editing the Rotation on Crease objects.

Select this topic to see information on editing the Oval Rotation if you are getting Bumps or Feathers on an oval opening.