This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 17 Next »

90 Degree Drop

The 90 Degree Cartridge cuts the drop with a 90° cut and leaves no bevel. 

Select the 90 Degree Drop Bevel Type

Select the 90° Tab on the Configurations screen.

Select the specific Drop bevel type from the Current Bevel Type dropdown control. 

Bevel displayed for clarity - the 90° Cartridge cuts with no bevel displayed.

  • Normal Drop

  • Normal Drop-Front of Mat

Select the Area of Concern for 90 Degree Drops Below:

90 Degree Drop Cuts the Wrong Depth When Using a SKU

Select this topic to adjust the Depth Bias.

90 Degree Drop Does Not Pause for Blade Change when Cutting

Select this topic to adjust the Plunge Count.

90 Degree Circle/Oval Drop Rotation Adjustments Using the Circle/Oval Rotation Utility

Select this topic to access the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals.

90 Degree Drop Exterior Backup is too Long

Select this topic to adjust the Exterior Backup.

90 Degree Drop Exterior Backup is too Short

Select this topic to adjust the Exterior Backup.

90 Degree Drop Exterior Overcut is too Long

Select this topic to adjust the Exterior Overcut.

90 Degree Drop Exterior Overcut is too Short

Select this topic to adjust the Exterior Overcut.

90 Degree Drop Interior Backup is too Long

Select this topic to adjust the Interior Backup.

90 Degree Drop Interior Backup is too Short

Select this topic to adjust the Interior Backup.

90 Degree Drop Interior Overcut is too Long

Select this topic to adjust the Interior Overcut.

90 Degree Drop Interior Overcut is too Short

Select this topic to adjust the Interior Overcut.

90 Degree Drop Cuts the Wrong Size 

Select this topic to adjust the Opening Adjustment.

90 Degree Drop has a Swoop

Select this topic to adjust the Rotation.

90 Degree Drop has a Flare 

Select this topic to adjust the Rotation.

90 Degree Oval Drop has a Bump 

Select this topic to adjust the Oval Rotation.

90 Degree Oval Drop has a Feather 

Select this topic to adjust the Oval Rotation.

Troubleshooting Button 

Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.

  • No labels