Click here to check out our new How To section

Quick Calibration Opening Adjustment

Owned by dani.simmonds

Last updated: Oct 15, 2024

2 min read

Quick Calibration Opening Adjustment

Quick Calibration Opening Adjustment

Contents:

Measure the width of the opening from the cutting side to make sure it is 2”; this example was cut from the back.

If the Opening is cut Too Large, Decrease the Opening Adjustment.
If the Opening is cut Too Small, Increase the Opening Adjustment.

For Additional Information: Troubleshooting Utility for the Configurations

Measure the Width of the Opening

Opening Adjustment Field