Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

  • The Head is attached to the Gantry via the Head Grabber Arm which moves vertically on the Gantry via the Vertical Belt.

  • The Head Wheels are spring-loaded and roll along the grooves in the Gantry.

  • The Vertical Belt is behind the Gantry Cover in some models.

Connections:

  • The Gantry is a spanning framework which attaches to the top and bottom of the Board and moves horizontally across it.

  • As the Gantry moves horizontally, the Head moves vertically via the Vertical Belt and the Footblock rotates to apply the Cartridge to the matboard.

Troubleshooting

See:

VerticalBeltPulley800.pngGantryCoverHeadOnZ1HeadUPNoArrows800.png
  • No labels