/
Vertical Belt Pulley Lubrication Instructions: All Current CMC Models

Vertical Belt Pulley Lubrication Instructions: All Current CMC Models

Owned by dani.simmonds
Last updated: Oct 07, 2024
3 min read

  • Lubricate the Gantry vertical belt pulley when there is loud squeaking when the Head is travelling up or down the Gantry.

  • Reset Motors by clicking the Reset Motors button on the FrameShop software.

Click Reset Motors

  • Remove the lower Gantry cover by removing the screw holding it in place.

8000TakeOffHeadCoverOffLowerFSUP800.png
Remove the Gantry Cover

Related content

Vertical Belt Pulley Replacement Instructions: All Current CMC Models
Vertical Belt Pulley Replacement Instructions: All Current CMC Models
Knowledge Base
More like this
Vertical Belt
Vertical Belt
Knowledge Base
More like this
Vertical Belt Tension Adjustment: CMC 8000, 8500 Series and the 8000RC
Vertical Belt Tension Adjustment: CMC 8000, 8500 Series and the 8000RC
Knowledge Base
More like this
Vertical Belt Tension Adjustment: CMC 9000, Z Series and the 8000+
Vertical Belt Tension Adjustment: CMC 9000, Z Series and the 8000+
Knowledge Base
More like this
Drive Belt Position Alignment: All Current CMC Models
Drive Belt Position Alignment: All Current CMC Models
Knowledge Base
More like this
Horizontal Belt Tension Adjustment: All Current CMC Models
Horizontal Belt Tension Adjustment: All Current CMC Models
Knowledge Base
More like this