Check out our new How To section at: How To...

Align the Head CMC 9000/8000/8000RC/8000+

Owned by dani.simmonds
Last updated: May 16, 2024
3 min read

Align the Head Button on the 9000/8000/8000RC/8000+

Align the Head Button on the 9000/8000/8000RC/8000+

  • Click the Align the Head button to Align the Head into the cutting position and power up the motors in preparation of cutting a mat.

  • Aligning the Head will get the machine ready to cut, but not actually cut.

  • You will need to click the Cut Button to cut the design.

Click the Align the Head Button to Align the Head in Preparations of Cutting

Align the Head Button vs. the Cut Button

 

CutScreenCutAlignHeadMiniZ1-70800.png
Click Align the Head or Click Cut if the Head is Not Aligned to Align the Head and Cut the Mat

Aligning the Head on the CMC 9000/8000/8000 RC/8000+ When Motors are Disengaged

Aligning the Head on the CMC 9000/8000/8000 RC/8000+ When Motors are Disengaged