Configurations Button
Configurations Button | |
---|---|
Calibration is the process of using the Configurations screen to make adjustments to the CMC to ensure that it is cutting the right size, in the correct position, the corners are precise, and there are no Swoops, Flares, Bumps or Feathers. Configurations Screen A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool. Cut Example and Cartridge with Blade Cutting from the Front will cut with the face of the mat toward the operator, and can be selected on the Cutting Preview.
If you are cutting an element that must be applied to the front of the mat, such as a V-Groove or Pen design, any openings on that layer will also cut from the front and use the Front of Mat configuration item; i.e., Normal Bevel-Front of Mat. So if you are having problems with a Normal Bevel cut on the same layer as a V-Groove, make sure you select Normal Bevel-Front of Mat to edit the configurations for that opening. |