The Vinyl Cartridge cuts designs into sheets of Vinyl which have been temporarily adhered to the matboard.  

Select this topic to see information on editing the configurations for the Vinyl Cartridge on the Vinyl Tab. 

The Vinyl defaults can be defined in the Admin section of the software.

Below is a list of support documentation for editing the configurations of the Vinyl Cartridge on the Vinyl Tab.

This is viewed from the front of the mat. Select this topic to see information on editing the Horizontal Adjustment.

This is viewed from the front of the mat. Select this topic to see information on editing the Vertical Adjustment.

This is viewed from the front of the mat. Select this topic to see information on editing the Opening Adjustment.

Select this topic to see information on editing the Depth Setting.

Select this topic to see information on editing the Corner Pause. 

This is viewed from the front of the mat. Select this topic to see information on editing the Overshoot.

This is viewed from the front of the mat. Select this topic to see information on editing the Overshoot.

Select this topic to see information on editing the Plunge between segments.

Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.

Set up the Vinyl Defaults in the Admin Editor section of the software.