Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 37 Next »

  • The CMC 9000 was introduced in February 2010.

  • Width: 72.5"  (9000S: 45")

  • Height: 52.5"

  • Weight: 135 lbs

  • Recommended work space: 80"W x 65"H

  • Air compressor required must supply 1cfm or greater.

  • Driver Pack/ECU: 120-240VAC  250W max.

  • Select the desired topic from the CMC model 9000 support documentation listed below.

Wizard CMC 9000 Overview

How a Wizard CMC Can Help Your Business: Video

Design Examples Cut on a Wizard CMC: Video

Wizard CMC 9000 Overview: Video

Board

CMC Model Cutting Information

Board 9000: CMC Components Labeled

Board: Drive Belt Documents

Board 9000: Drive Belt Position Alignment

Board 9000: Drive Belt Position Fine-Tune

Board 9000: Drive Belt Replacement

Board: Emergency Stop Button

Board 9000: Emergency Stop Button

Board: Horizontal Belt: Adjust Horizontal Belt Tension

Board 9000: Horizontal Belt: Adjust Horizontal Belt Tension

Board: Maintenance: Recommended Maintenance

Board 9000: Maintenance: Recommended Maintenance

Board: Stop Plate Installation

Board 9000: Magnetic Stop Plate Installation

Board 9000: Stop Plate Installation

Cartridges: Blades: Changing the Blade Documents

Cartridges 9000: Blades: Blade and Cartridge Identification

Cartridges 9000: Blades: Change the 45 Degree Blade

Cartridges 9000: Blades: Change the 45 Degree Plus Blade

Cartridges 9000: Blades: Change the 52 Degree Blade

Cartridges 9000: Blades: Change the 90 Degree Blade

Cartridges 9000: Blades: Change the Vinyl Cartridge Blade

Cartridges: Changing the Cartridges Documents

Cartridges 9000: Change to the 45 Degree Cartridge

Cartridges 9000: Change to the 45 Plus Degree Cartridge

Cartridges 9000: Change to the 52 Degree Cartridge

Cartridges 9000: Change to the 90 Degree Cartridge

Cartridges 9000: Change to the Deboss Cartridge

Cartridges 9000: Change to the Pen Cartridge

Cartridges 9000: Pen Tool: Installing the Pen Cartridge: Video

Cartridges 9000: Change to the Vinyl Cartridge

Cartridges 9000: Vinyl Tool Demonstration Video

Cartridges 9000: Change to the Crease Cartridge

ECU Documents

ECU/Driver Pack Types

ECU/Driver Pack 9000: No Power Available to the ECU

ECU 9000: ECU Drivers Install

ECU 9000: ECU Drivers Uninstall

ECU 9000: ECU Ferrite Attachment Installation

ECU 9000: ECU Hardware Install

ECU 9000: ECU Turning Off and On Specifics

ECU 9000: ECU USB HUB for Improved Connection Performance

Gantry Documents

Gantry 9000: Air Valve Assembly Replacement

Gantry 9000: Air Valve Assembly Replacement Video

Gantry 9000: Air Valve Assembly Test Buttons

Gantry 9000: Remove Gantry Shipping Lock Screws

Gantry Replacement: CMC 9000

Gantry 9000: Vertical Belt: Adjust Gantry Vertical Belt Tension

Gantry 9000: Vertical Belt: Lubrication Instructions

Gantry 9000: Vertical Belt: Replacement Instructions for Gantry Vertical Belt Pulley

Gantry 9000: Replacing Gantry Vertical Belt Pulley

Getting Started

Getting Started Manual CMC 9000

Head Documents

Head 9000: Align the Head

Head 9000: Blade Depth Dial Calibration

Head 9000: Blade Depth Dial Calibration Video

Head 9000: Measuring the Blade Depth

Head 9000: Footblock Cleaning and Lubrication

Head 9000: Footblock Glide Screw Adjustment

Head 9000: Footblock Replacement Instructions

Head 9000: Head Assembly Power Cable Strain Relief Installation

9000 Head Replacement

Head 9000 Wheel Adjustment

Head 9000 Wheel Adjustment Video

Head 9000 Variable Pressure Optimization (VPO): Adjustment Instructions

Head 9000 VPO: Cutting a Dense Layer

Head 9000 VPO: Cutting an Extra Dense Layer with the 90° Cartridge

Head 9000 VPO: Cutting a Typical Matboard

Parts Return Packaging Documentation

Parts Return Packaging: Assembling the CMC Shipping Box

Parts Return Packaging: Customer Repackaging Instructions for Moving the CMC

Parts Return Packaging: Upgrade/Termination Hardware Return Instructions

Packaging Gantry and Head to Ship Back to Wizard

CMC Stand Documents

Fixed Wall Mount Instructions

Floor Stand Assembly Instructions

Retractable Wall Mount (RWM)

  • No labels