Versions Compared

Old Version 28

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 35

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Create a Doily Shape

Info

  • This lesson shows how to create a simple Doily shape.

Panel
panelIconId1f9d9-200d-2640-fe0f
panelIcon:woman_mage:
panelIconText🧙‍♀️
bgColor#FFEBE6
Info

  • This also describes how to make an alternative design by adding Layers to it.

Design in FrameShop then Bring into Trace

  • First we need to make sure we are designing the layers in the correct order for these instructions.

  • On the FrameShop Main Page, click Admin and stay on the Defaults tab.

  • Under Layer Direction select Bottom Up if it is not already set to that.

  • Click Save and return to the Main Page.

    • You can change this back to the original setting later if desired.

Panel
panelIconId1f9d9-200d-2640-fe0f
panelIcon:woman_mage:
panelIconText🧙‍♀️
bgColor#FFEBE6

  • Layer Direction: Bottom Up is the preferred direction.

    • When you Offset an object to create another layer, that new layer will be the Top layer.

  • Layer Direction: Top Down is not recommended.

    • When you Offset an object to create another layer, that new layer will be the Bottom layer, even though it is larger than the original object.

2LayerLetterMatDefaultDirection800.png
Expand
titleTemplate Definition

Templatesare specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

See: Template Properties

See: Template Library

  • Click on the Properties tab.

  • Click on the Parameters tab.

  • Change the No. of Points to 6.

  • Change the Spikiness to 0.

  • Change the Mode to 2. 

  • Change the Line Length to 2.

Expand
titleParameters Definition

The Parameters are set of specified variable characteristics related to the selected object that can be modified through the accompanying fields in Designerthe Design Editor.

For example, the Chamfer is the symmetrical angled surface at the corner of the Template.

In Designerthe Design Editor, the Template Parameter Map displays a diagram describing each parameter field for the current Template.

  • Place a one Layer 2.75 x 2.75" #102 Oval Template in the top portion of the Polygon.

    • The circle will create the petal of the Doily.

  • Move the circle so that it lines up with the Top of the Star Template.

Expand
titleTemplate Definition

Templatesare specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

See: Template Properties

See: Template Library

Bring Design into Trace

Expand
titleCutArt Definition

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

CutArtExample70800.pngImage Modified

See: Add CutArt Function

Draw Alignment Lines

Info

  • We will add some Alignment Lines that we will use to Mirror the circle.

  • You can Mirror the circle without the Alignment Lines, but adding them will help illustrate the process.

  • Click the Line button on the Trace and Draw tab. The Draw radio button is automatically selected.

  • Right-Click on the center point of one of the Lines of the Polygon. 

Expand
titleLines Definition

The Line /wiki/spaces/FrameShop8x/pages/1942694019tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).

After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc /wiki/spaces/FrameShop8x/pages/1942509136.

See: Line Tool Function

Expand
titleMirror Definition

The Mirror /wiki/spaces/FrameShop8x/pages/1942694450function will create a Mirror copy of the selected object along the selected axis in Trace andDesignerthe Design Editorand mirror the image horizontally in Visualize.

See: Mirror in Trace Function

See: Mirror CutArt in Designerthe Design Editor

See: Mirror Image in Visualization

  • Right-Click on the center point of the opposite Line of the Polygon.

Info

  • The Line is placed.

Expand
titleLine Definition

The Line /wiki/spaces/FrameShop8x/pages/1942694019tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).

After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc. /wiki/spaces/FrameShop8x/pages/1942509136.

See: Line Tool Function

  • Do the same with the other sides of the polygon, Right-Clicking and Snapping to the Center Point then Snapping to the Center Point on the opposite point.

  • Make sure that the Circle crosses over the Lines a little in order to have the Mirrored version of the Circle overlap.

  • If it doesn't, either make the Circle larger or Offset it to make it larger.

Expand
titleLine Definition

The Line /wiki/spaces/FrameShop8x/pages/1942694019tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).

After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc /wiki/spaces/FrameShop8x/pages/1942509136.

See: Line Tool Function

Expand
titleMirror Definition

The Mirror /wiki/spaces/FrameShop8x/pages/1942694450function will create a Mirror copy of the selected object along the selected axis in Trace andDesignerthe Design Editorand mirror the image horizontally in Visualize.

See: Mirror in Trace Function

See: Mirror CutArt in Designerthe Design Editor

See: Mirror Image in Visualization

Expand
titleOffset Definition

The Offset button creates a displacement copy of the selected object a parallel distance away as specified in the Offset Revealfield.

Offset Rules:

Enclosed Objects:

  • The Left < button will offset an enclosed object to the outside.

  • The Right > button will offset an enclosed object to the inside.

Arcs and Curves greater than 180 Degrees use the same rules as closed objects. 

Unenclosed Objects:

For unenclosed objects the arrow buttons depend on the direction of travel of the vector segments, starting from the line’s start point. The Left < button offsets Clockwise and Right > button offsets Counter-Clockwise.

If it doesn’t Offset in the expected direction, click Undo and click the other Offset Direction.

See: Offset Function in Trace

Mirror the Circle

  • Click on the Edit radio button.

  • Hold down the CTRL key and click on the Circle.

  • Click the Mirror button.

Expand
titleMirror Definition

The Mirror /wiki/spaces/FrameShop8x/pages/1942694450function will create a Mirror copy of the selected object along the selected axis in Trace andDesignerthe Design Editorand mirror the image horizontally in Visualize.

See: Mirror in Trace Function

See: Mirror CutArt in Designerthe Design Editor

See: Mirror Image in Visualization

  • Right-Click on the point where the Upper Left Line begins.

Expand
titleLine Definition

The Line /wiki/spaces/FrameShop8x/pages/1942694019tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).

After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc /wiki/spaces/FrameShop8x/pages/1942509136.

See: Line Tool Function

  • Right-Click on the end of the line at the Lower Right Side.

Info

  • The Circle as been Mirrored using the Line we drew as the axis.

Expand
titleMirror Definition

The Mirror /wiki/spaces/FrameShop8x/pages/1942694450function will create a Mirror copy of the selected object along the selected axis in Trace andDesignerthe Design Editorand mirror the image horizontally in Visualize.

See: Mirror in Trace Function

See: Mirror CutArt in Designerthe Design Editor

See: Mirror Image in Visualization

Expand
titleLine Definition

The Line /wiki/spaces/FrameShop8x/pages/1942694019tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).

After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc /wiki/spaces/FrameShop8x/pages/1942509136.

See: Line Tool Function

  • Click on the new Circle. 

  • Click the Mirror button.

  • Right-Click at each end of the Alignment Line.

Expand
titleMirror Definition

The Mirror /wiki/spaces/FrameShop8x/pages/1942694450function will create a Mirror copy of the selected object along the selected axis in Trace andDesignerthe Design Editorand mirror the image horizontally in Visualize.

See: Mirror in Trace Function

See: Mirror CutArt in Designerthe Design Editor

See: Mirror Image in Visualization

  • The Circle has been Mirrored using the Line we drew as the axis.

Expand
titleMirror Definition

The Mirror function will create /wiki/spaces/FrameShop8x/pages/1942694450function will create a Mirror copy of the selected object along the selected axis in Trace andDesignerthe Design Editorand mirror the image horizontally in Visualize.

See: Mirror in Trace Function

See: Mirror CutArt in Designerthe Design Editor

See: Mirror Image in Visualization

Expand
titleLine Definition

The Line /wiki/spaces/FrameShop8x/pages/1942694019tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).

After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc /wiki/spaces/FrameShop8x/pages/1942509136.

See: Line Tool Function

  • Repeat the process by selecting the next Circle, clicking the Mirror button, then snapping to each end of the Alignment Line.

Expand
titleMirror Definition

The Mirror /wiki/spaces/FrameShop8x/pages/1942694450function will create a Mirror copy of the selected object along the selected axis in Trace andDesignerthe Design Editorand mirror the image horizontally in Visualize.

See: Mirror in Trace Function

See: Mirror CutArt in Designerthe Design Editor

See: Mirror Image in Visualization

Expand
titleLine Definition

The Line /wiki/spaces/FrameShop8x/pages/1942694019tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor).

After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an Arc.

Image Removed

/wiki/spaces/FrameShop8x/pages/1942509136.

Image Added

See: Line Tool Function

  • The Circle has been Mirrored all the way around the design.

Expand
titleMirror Definition

The Mirror /wiki/spaces/FrameShop8x/pages/1942694450function will create a Mirror copy of the selected object along the selected axis in Trace andDesignerthe Design Editorand mirror the image horizontally in Visualize.

See: Mirror in Trace Function

See: Mirror CutArt in Designerthe Design Editor

See: Mirror Image in Visualization

Break all Intersections

Info

  • Now we want to Break All of the Intersections where all segments in the design intersect with other segments.

Expand
titleBreak Definition

The Break Tool tool is used to Bisect the Selected Segments at the point where they Intersect in the Trace software.

The Break All Intersections function bisects ALL Segments in the design where they intersect in the Trace software.

See: Break All Intersections Function

  • The Intersections are now Broken where the objects crossed over each other.

Expand
titleBreak Definition

The Break Tool tool is used to Bisect the Selected Segments at the point where they Intersect in the Trace software.

The Break All Intersections function bisects ALL Segments in the design where they intersect in the Trace software.

See: Break All Intersections Function

Join Segments

Info

  • We will now Join all of the segments that will make up the opening of the design.

  • Hold down the CTRL key and click on the each of the Left Side Arcs of one of the Broken Circles.

  • Click the Join button.

Expand
titleJoin Definition

The Join button will connect the Selected Segments together as one object in Trace. 

The Auto Join Segments button will automatically join All Adjacent Segments together in Trace.

See: Join Tool Function

See: Auto Join Segments Function

  • The Arcs are joined together as a single entity.

  • If the Arcs don't connect as expected, you might have missed an Arc.

    • Click the Undo button, reselect the Arcs and click the Join button again. 

Expand
titleArc Definition

The Arc tool allows you to draw athree-point mathematically defined arc in the Trace software.

The Arc /wiki/spaces/FrameShop8x/pages/1942694083 has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor).

The Convert Arc to Splines /wiki/spaces/FrameShop8x/pages/1942692800 process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.

See: Arc Tool in Trace

See: Arc Tool Definition /wiki/spaces/FrameShop8x/pages/1942694083

See: Splines Definition

See: Convert Arc to Splines Function

Expand
titleSpline Definition

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points:

Initial Position (called an Anchor)

Two Separate Middle Points (called Handles) which can be moved to alter the shape.

Terminating Position (called an Anchor)

Splines are easier to handle in the software than Arcs for tangification which makes the cuts smoother between arcs.

The Convert Arc to Splines process will convert the Arcs to Splines for software simplification purposes.

Arcs are provided for those that prefer to draw with them.

See: Arc Tool in Trace

See: Arc Tool Definition /wiki/spaces/FrameShop8x/pages/1942694083

See: Splines Definition

See: Convert Arc to Splines Function

Expand
titleJoin Definition

The Join button will connect the Selected Segments together as one object in Trace. 

The Auto Join Segments button will automatically join All Adjacent Segments together in Trace.

See: Join Tool Function

See: Auto Join Segments Function

  • Hold down the CTRL key and select the Arcs of the next Broken Circle.

  • Click the Join button. 

Expand
titleArc Definition

The Arc tool allows you to draw athree-point mathematically defined arc in the Trace software.

The Arc has /wiki/spaces/FrameShop8x/pages/1942694083 has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor).

The Convert Arc to Splines /wiki/spaces/FrameShop8x/pages/1942692800 process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.

See: Arc Tool in Trace

See: Arc Tool Definition /wiki/spaces/FrameShop8x/pages/1942694083

See: Splines Definition

See: Convert Arc to Splines Function

Expand
titleSpline Definition

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: Initial Position (called an Anchor), Two Separate Middle Points (called Handles) which can be moved to alter the shape, and the Terminating Position (called an Anchor)

The Convert Arc to Splines process will convert any Arcs to Splines/Curves which are easier to tangify to make cuts smoother.

See: Arc Definition

See: Arcs Tool Function

See: Splines Definition

See: Splines Tool Function

See: Convert Arc to Splines Function

Expand
titleJoin Definition

The Join button will connect the Selected Segments together as one object in Trace. 

The Auto Join Segments button will automatically join All Adjacent Segments together in Trace.

See: Join Tool Function

See: Auto Join Segments Function

Info

  • Continue selecting the arcs that make up each of the Broken Circles and Joining them until you have Joined each of the outside Arcs.

  • Hold down the CTRL key and select all of the newly joined Arcs. 

  • Click the Join button.

Expand
titleArc Definition

The Arc tool allows you to draw athree-point mathematically defined arc in the Trace software.

The Arc /wiki/spaces/FrameShop8x/pages/1942694083 has three points: Initial Position (called an Anchor), Middle Point (called a Handle) which can be moved to change the shape of the Arc, and Terminating Position (called an Anchor).

The Convert Arc to Splines /wiki/spaces/FrameShop8x/pages/1942692800 process will convert the Arcs to Splines which are easier to tangify to make cuts smoother.

See: Arc Tool in Trace

See: Arc Tool Definition /wiki/spaces/FrameShop8x/pages/1942694083

See: Splines Definition

See: Convert Arc to Splines Function

Expand
titleSpline Definition

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points:

Initial Position (called an Anchor)

Two Separate Middle Points (called Handles) which can be moved to alter the shape.

Terminating Position (called an Anchor)

Splines are easier to handle in the software than Arcs for tangification which makes the cuts smoother between arcs.

The Convert Arc to Splines process will convert the Arcs to Splines for software simplification purposes.

Arcs are provided for those that prefer to draw with them.

See: Arc Tool in Trace

See: Arc Tool Definition See: /wiki/spaces/FrameShop8x/pages/1942694083

See: Splines Definition

See: Convert Arc to Splines Function

Expand
titleJoin Definition

The Join button will connect the Selected Segments together as one object in Trace. 

The Auto Join Segments button will automatically join All Adjacent Segments together in Trace.

See: Join Tool Function

See: Auto Join Segments Function

  • The Arcs are now one connected entity.

Convert to Splines/Tangify

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6
Expand
titleConvert Arcs to Splines Definition

The Convert Arc to Splines process will convert the Arcs to Splines /wiki/spaces/FrameShop8x/pages/1942513851 which are easier to tangify to make cuts smoother.

See: Arcs Definition

See: Arcs Tool Function

See: Splines Definition

See: Splines Tool Function

See: Convert Arc to Splines Function

Expand
titleTangify all Circuits Definition

The Tangify function will smooth the connection between the Selected Arc Circuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs. 

The Tangify All Circuits will smooth the connection between All of the ArcCircuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs. 

See: Tangify Function

See: Tangify All Circuits Function

See: Arc Tool in Trace

See: Arc Tool Definition /wiki/spaces/FrameShop8x/pages/1942694083

See: Splines Definition

See: Convert Arc to Splines Function 

Trace

, Save, Cut

  • Trace the CutArt.

    • Save the CutArt. You will get a message stating that this design contains objects that do not have an assigned bevel type. This refers to the leftover

    the Design

    • Click on the Set Bevels tab.

    • Click on the Doily opening.

    • Select the desired Bevel Type then click Set.

    • The outside of the Doily turns the color of the Bevel Type selected and is now traced.

    		L7DoilyOrigTrace70800.pngImage Added

    Save and Cut

    • Save the CutArt. You will get a message stating that this design contains objects that do not have an assigned bevel type. This refers to the leftover lines and arcs that we didn't trace. Click Yes that you wish to continue.

    • Load the CutArt.

    • Cut the CutArt.

    Info

    • Optionally, you can also bring the CutArt straight to the Cut Preview from Trace.

    • The Doily design is completed.

    Expand
    titleTrace Definition

    Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

    The Set Bevels Tab in Trace contains the tools needed to Trace the design.

    See: Tracing the Design

    CutArt™ are simple shapes and design elements created by Wizard that can be added to
    Expand
    Expand
    titleCutArt Definition
    titleBevel Type Definition

    The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

    Image Removed
    CutArt Definition

    CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

    CutArts can be applied to your current design and edited, such as resizing and rotating.

    They can be Cut, Debossed, Penned or cut on Vinyl.

    CutArtExample70800.pngImage Modified

    See: Add CutArt Function

    Optional Design

    Info

    • Move the design further into the screen if necessary in order to be able to see the Offset Layer.

    • Select the Doily.

    • Leave the Reveal value at .25".

    • Click the Left < Offset Circuit button.  

    Info

    • The Doily is now offset to create the second Layer.

    Expand
    titleOffset Rules

    Offset Rules:

    Enclosed Objects:

    • The Left < button will offset an enclosed object to the outside.

    • The Right > button will offset an enclosed object to the inside.

    Arcs and Curves greater than 180 Degrees use the same rules as closed objects. 

    Unenclosed Objects:

    For unenclosed objects the arrow buttons depend on the direction of travel of the vector segments, starting from the line’s start point. The Left < button offsets Clockwise and Right > button offsets Counter-Clockwise.

    If it doesn’t Offset in the expected direction, click Undo and click the other Offset Direction.

    Expand
    titleOffset Definition

    The Offset button creates a displacement copy of the selected object a parallel distance away as specified in the Offset Revealfield.

    See: Offset Function in Trace

    Offset Rules:

    Enclosed Objects:

    • The Left < button will offset an enclosed object to the outside.

    • The Right > button will offset an enclosed object to the inside.

    Arcs and Curves greater than 180 Degrees use the same rules as closed objects. 

    Unenclosed Objects:

    For unenclosed objects the arrow buttons depend on the direction of travel of the vector segments, starting from the line’s start point. The Left < button offsets Clockwise and Right > button offsets Counter-Clockwise.

    If it doesn’t Offset in the expected direction, click Undo and click the other Offset Direction.

    Expand
    titleReveal Definition

    In a two-layer design, the Reveal is the amount of the bottom matboard showing under the top mat in Designer the Design Editor and Visualize.

    The standard Reveal between the top and bottom mat is 1/4".

    See: Designer Design Editor Reveal Function

    Explode New Layer

    Info

    • The new Offset created an outside layer, but the arcs overlap in the corners.

    • We will have to Explode this new layer to edit it.

    • Click on the new layer to select it and click Explode.

    • The new layer will be exploded into the individual arcs that created it.

    		L7Doily2ndLayerExplode70800.pngImage RemovedL7DoilyOffsetExplode70800.pngImage Added

    • Now click the Auto Join Segments button to join the segments than that can be joined.

    		L7Doily2ndLayerAutoJoin70800.png

    • If you move your cursor, you will see that each arc is the small arcs that make up the large arcs are now connected together, but the large arcs are not connected to the other arcs together because they cross each other.

    		L7Doily2ndLayerArcConnected70800.png

    • Now we will select each of these Arcs and click Break to break them where they intersect.

    		L7Doily2ndLayerBreakArcs70800.png

    • If you move your cursor, you will see that each arc is now broken where they cross each other.

    		L7Doily2ndLayerBreakArcsDone70800.png

    Join Outside Segments

    Info

    • We will now Join all of the segments that will make up the outside Layer of the design.

    • Hold down the CTRL key and click on the each of the Arcs that make up the outside layer of the design.

    • Click the Join button.

    Expand
    titleJoin Definition

    The Join button will connect the Selected Segments together as one object in Trace. 

    The Auto Join Segments button will automatically join All Adjacent Segments together in Trace.

    See: Join Tool Function

    See: Auto Join Segments Function

    • The segments of the outside Layer are now Joined to create one object.

    Expand
    titleJoin Definition

    The Join button will connect the Selected Segments together as one object in Trace. 

    The Auto Join Segments button will automatically join All Adjacent Segments together in Trace.

    See: Join Tool Function

    See: Auto Join Segments Function

    • We could repeat these same steps to add a third Layer using a 1/8" reveal by Offsetting the outside object by .125", Breaking Exploding the newly Offset object, then Rejoining the outside elements to create the top Layer.

    • Depending upon the Template, the size, the Parameters, etc., you may not need to BreakExplode the elements before Joining them together if the Offset connects together neatly in the corners.

    Expand
    titleOffset Definition

    The Offset button creates a displacement copy of the selected object a parallel distance away as specified in the Offset Revealfield.

    See: Offset Function in Trace

    Offset Rules:

    Enclosed Objects:

    • The Left < button will offset an enclosed object to the outside.

    • The Right > button will offset an enclosed object to the inside.

    Arcs and Curves greater than 180 Degrees use the same rules as closed objects. 

    Unenclosed Objects:

    For unenclosed objects the arrow buttons depend on the direction of travel of the vector segments, starting from the line’s start point.

    The Left < button offsets Clockwise and Right > button offsets Counter-Clockwise.

    If it doesn’t Offset in the expected direction, click Undo and click the other Offset Direction.

    Expand
    titleBreak Definition

    The Break Tool tool is used to Bisect the Selected Segments at the point where they Intersect in the Trace software.

    The Break All Intersections function bisects ALL Segments in the design where they intersect in the Trace software.

    See: Break All Intersections Function

    Expand
    titleJoin Definition

    The Join button will connect the Selected Segments together as one object in Trace. 

    The Auto Join Segments button will automatically join All Adjacent Segments together in Trace.

    See: Join Tool Function

    See: Auto Join Segments Function

    Expand
    titleTemplate Definition

    Templatesare specialized parametric shape generators created by Wizard.

    Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

    The Template Library displays the different templates that are available for use.

    See: Template Properties

    See: Template Library

    Expand
    titleParameters Definition

    The Parameters are set of specified variable characteristics related to the selected object that can be modified through the accompanying fields in Designerthe Design Editor.

    For example, the Chamfer is the symmetrical angled surface at the corner of the Template.

    In Designerthe Design Editor, the Template Parameter Map displays a diagram describing each parameter field for the current Template.

    Trace, Save, Cut

  • Trace the CutArt. Remember to Add a layer in the Layers section for each layer of matboard you want to trace. Click on the desired layer, select the object to trace, then select the bevel/cartridge to trace the item for that layer.

    • Save

    Tracing the Optional Design

    • Click on the Set Bevels tab.

    • Click Add twice to add two new layers that we can trace the new layers onto.

    		L7Doily2ndLayerAddLayers70800.pngImage Added

    • Click on the Top Layer.

    • Click on the outside doily opening.

    • Select the desired Bevel Type then click Set.

    • The outside of the doily turns the color of the Bevel Type selected.

    		L7DoilyAltTraceOutside70800.pngImage Added

    • Click on the Middle Layer.

    • Click on the middle doily opening.

    • Select the desired Bevel Type then click Set.

    • The middle of the doily turns the color of the Bevel Type selected.

    		L7DoilyAltTraceMiddle70800.pngImage Added

    • Click on the Bottom Layer.

    • Click on the inside doily opening.

    • Select the desired Bevel Type then click Set.

    • The bottom of the doily turns the color of the Bevel Type selected.

    • The design is now fully traced.

    		L7DoilyAltTraceBottom70800.pngImage Added

    Save and Cut

    • Save the CutArt. You will get a message stating that this design contains objects that do not have an assigned bevel type. This refers to the leftover lines and arcs that we didn't trace. Click Yes that you wish to continue.

    • Load the CutArt.

    • Cut the CutArt.

    • Optionally, you can also bring the CutArt straight to the Cut Preview from Trace.

    Info

    • The multi-layered Doily design is completed.

    Expand
    titleTrace Definition

    Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

    The Set Bevels Tab in Trace contains the tools needed to Trace the design.

    See: Tracing the Design

    Expand
    titleBevel Type Definition

    The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

    Image Removed

    Expand
    titleCutArt Definition

    CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

    CutArts can be applied to your current design and edited, such as resizing and rotating.

    They can be Cut, Debossed, Penned or cut on Vinyl.

    CutArtExample70800.pngImage Modified

    See: Add CutArt Function

    Comparison

    You can see how much we changed the design when you compare it to what we started with. You can alter the design greatly by changing the number of sides of the Star template or even selecting a different template to mirror in each of the corners.

    Set up as a one layer design:

    Set up as a three layer design: