Versions Compared

Old Version 20

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cartridges Involved

This Configuration element involves the following Cartridges.

Note: Not all cartridges are available for all CMC models.

Image Removed

Deboss Wide Configurations

  • The Blue Deboss Wide Cartridge presses a wide stylus into the matboard to create a subtle design.

Image Removed

Select the Deboss Wide Cartridge Type

  • Select the Deboss Tab on the Configurations screen.  

  • Select the Wide-Blue cartridge from the Cartridge dropdown control.

Image Removed

Select the Area of Concern for Wide Deboss Below:

  • Be sure to select the Deboss Wide from the Current Bevel Type dropdown control.

Deboss
The

Deboss Wide Configurations

Contents:

Problem:

Horizontally.

Resolution:

Info

  • The Horizontal Home controls where the opening is cut Horizontally.

Image Removed

Deboss-Wide is Applied to the Wrong Place Vertically 

Problem:

The Deboss-Wide is Applied to the Wrong Place
.

Resolution:

Info

  • The Vertical Home controls specifically where the opening is cut Vertically.

Image Removed

Deboss-Wide is the Wrong Size

Problem:

The
.

Resolution:

Info

  • The Opening Adjustment controls the size of the opening.

Image RemovedThe

Problem:

is Applied at the Wrong Depth.

Resolution:

InfoThe Depth Setting sets the proper Blade Depth for the Deboss
.Image RemovedDeboss-Wide Cartridge
 

Problem:

  • Deboss-Wide Cartridge Tears the Mat.

Resolution:

Info

  • The Corner Pause controls the amount of time, in milliseconds, to pause the application of the non-blade tools in the corners to avoid tearing the mat.

Image Removed
Problem:

The
Long.

Resolution:

Info

  • The Overshoot controls how far past each segment the non-blade tool (Deboss, Pen or Vinyl) is applied.

Image Removed

Deboss-Wide Lines are too Short 

Problem:

  • The Deboss-Wide Lines are too Short.

Resolution:

Info

  • The Overshoot controls how far past each segment the non-blade tool (Deboss, Pen or Vinyl) is applied.

Image Removed

Deboss-Wide Set to Plunge Between Segments

Problem:

  • The Deboss-Wide Set to Plunge Between Segments.

Resolution:

  • Adjust the Plunge. Select this topic to adjust the Plunge between segments.

Image Removed

Troubleshooting Button 

Info
Image Removed

Deboss Wide Definition

Expand
titleDeboss Wide Definition

The Deboss Wide Blue cartridge stylus presses onto the surface of the matboard to create a subtle design with a Wide line.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs.

Image AddedImage Added

See: Add Deboss Opening Function