Check out our new How To section at: How To...

Vertical Adjustment on Non-Blade Cartridges

Owned by dani.simmonds

Last updated: Aug 16, 2024

3 min read

Vertical Adjustment on Non-Blade Cartridges

Vertical Adjustment on Non-Blade Cartridges

If the Non-Blade Tool line is applied Too Far Up Vertically, Decrease the Vertical Adjustment.
If the Non-Blade Tool line is applied Too Far Down Vertically, Increase the Vertical Adjustment.

Contents:

For Additional Information:
See Vertical Home which defines the global Vertical placement of objects cut with the Blade Cartridges.
See Vertical Home on the Troubleshooting Utility to adjust the bladed cartridges.

Select desired Cartridge Tab.

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Vertical Adjustment Field

Vertical Adjustment of Non-Blade Tool Lines