Check out our new How To section at: How To...

Overshoot on Non-Blade Cartridges

Owned by dani.simmonds
Last updated: Aug 19, 2024
1 min read

Overshoot on Non-Blade Cartridges

Overshoot on Non-Blade Cartridges

  • If the Overshoot of the Non-Blade Tool is applied Too Long, Decrease the Overshoot.

  • If the Overshoot of the Non-Blade Tool is applied Too Short, Increase the Overshoot.

Contents:

Select desired Cartridge Tab. 

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Overshoot Field
Overshoot of the Non-Blade Tool