Page Comparison

• This lesson shows how to Mirror a CutArt to create a Scrolled Starburst design.

The Mirror function will create a Mirror copy of the selected object along a selected axis in Trace and Visualize.

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

• Place a one Layer 4 x 5" #506 Star Template on the FrameShop Design Editor.

Templates are specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

• Click on the Properties tab.

• Click on the Parameters tab.

• Change the No. of Points to 6.

• Change the Spikiness to 0.

• Change the Mode to 2. 

• Change the Line Length to 2.85".

The Parameters are a set of specified variable characteristics related to the selected object that can be modified through the accompanying fields in Designer.

For example, the Chamfer is the symmetrical angled surface at the corner of the Template.

In Designer, the Template Parameter Map displays a diagram describing each parameter field for the current Template.

• Click on the Openings tab.

• Click the Add CutArt button.

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

• Select the desired CutArt by either searching for it in the search field or by navigating through the directories.

  • This example uses ScrollAN for the CutArt.

• Click the Edit button.

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

• The CutArt is placed on the Editor.

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

• Move the CutArt so that it is aligned with the Top of the Star Template.

• If you accidentally click off of the CutArt and it moves behind the Star, hit the PgUp/PgDn key to cycle through the Openings.

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

Templates are specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

• Bring the design into Trace via the Right-Click Menu* or from the Cut Preview Screen.

  • *If you use the Right-Click method, hold down the CTRL key and select both openings before selecting Convert to CutArt. 

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

Templates are specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

• We will add some Alignment Lines that we will use to Mirror the CutArt.

• You can Mirror the CutArt without the Alignment Lines, but adding them will help illustrate the process.

• Click the Line button on the Trace and Draw tab. The Draw radio button is automatically selected.

• Right-Click on the Center Point of one of the Lines of the Polygon.

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: the Initial Position and the Terminating Position (which are called “anchors”).

After it is drawn, a third point in the Center is displayed, which can be moved to alter the Line into an Arc.

The Mirror function will create a Mirror copy of the selected object along a selected axis in Trace and Visualize.

• Right-Click on the Center Point of the opposite Line of the Polygon.

• The Line is placed.

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: the Initial Position and the Terminating Position (which are called “anchors”).

After it is drawn, a third point in the Center is displayed, which can be moved to alter the Line into an Arc.

• Do the same with the other sides of the Polygon, Right-Clicking and Snapping to the Center Point then Snapping to the Center Point on the opposite Point.

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: the Initial Position and the Terminating Position (which are called “anchors”).

After it is drawn, a third point in the Center is displayed, which can be moved to alter the Line into an Arc.

• Click on the Edit radio button.

• Hold down the CTRL key and click on both the Inner and the Outside of the CutArt.

• Click the Mirror button.

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

The Mirror function will create a Mirror copy of the selected object along a selected axis in Trace and Visualize.

• Right-Click on the point where the Upper Left Line begins.

• Right-Click on the end of the Line at the Lower Right side.

• The CutArt has been Mirrored using the Line we drew as the axis.

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: the Initial Position and the Terminating Position (which are called “anchors”).

After it is drawn, a third point in the Center is displayed, which can be moved to alter the Line into an Arc.

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

The Mirror function will create a Mirror copy of the selected object along a selected axis in Trace and Visualize.

• Hold down the CTRL key and select the elements of the next CutArt.

• Click the Mirror button.

• Right-Click at each end of the Alignment Line.

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

The Mirror function will create a Mirror copy of the selected object along a selected axis in Trace and Visualize.

• The CutArt as been Mirrored using the Line we drew as the axis.

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

The Mirror function will create a Mirror copy of the selected object along a selected axis in Trace and Visualize.

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: the Initial Position and the Terminating Position (which are called “anchors”).

After it is drawn, a third point in the Center is displayed, which can be moved to alter the Line into an Arc.

• Repeat the process.

• Select all of the Objects of the next CutArt, click the Mirror button, then Snap to each end of the Alignment Line.

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

The Mirror function will create a Mirror copy of the selected object along a selected axis in Trace and Visualize.

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: the Initial Position and the Terminating Position (which are called “anchors”).

After it is drawn, a third point in the Center is displayed, which can be moved to alter the Line into an Arc.

• The CutArt has been Mirrored all the way around the design.

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

The Mirror function will create a Mirror copy of the selected object along a selected axis in Trace and Visualize.

• Now we want to Break All of the Intersections where the Lines and Arcs pass over the other Lines/Arcs.

• Click Edit > Break all Intersections.

The Line tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: the Initial Position and the Terminating Position (which are called “anchors”).

After it is drawn, a third point in the Center is displayed, which can be moved to alter the Line into an Arc.

The Arc Tool tool function allows you to draw a three-point mathematically defined curve in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle") which can be moved to change the shape of the Arc.

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and two separate Middle Points (which are called "Handles"), which can be moved to alter the shape.

• The Intersections are now Broken where the objects crossed over each other.

• We will now Join all of the segments that will make up the outside of the design.

• Hold down the CTRL key and click on the Left Side of the Top CutArt.

• Click on the Arcs just outside of the Polygon.

• Click on the Right Side of the Top CutArt.

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

The Arc Tool tool function allows you to draw a three-point mathematically defined curve in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle") which can be moved to change the shape of the Arc.

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and two separate Middle Points (which are called "Handles"), which can be moved to alter the shape.

• Continue in this manner until you have selected all of the Elements that make up the outside of the design.

• Click the Join button.

• The segments are now Joined together as one object.

The Join button will connect the selected segments together as one object in Trace. 

The Auto Join Segments button will automatically join adjacent segments together in Trace.

• Zoom in to the Center of the design.

• If you click on one of the Inner Openings, you will see that it is not a complete enclosed object since we Broke the Intersections where the Arcs crossed one another.

• Click on one of the Inner Openings and click the Close button.

• The Inner Openings is now an enclosed entity.

The Arc Tool tool function allows you to draw a three-point mathematically defined curve in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle") which can be moved to change the shape of the Arc.

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and two separate Middle Points (which are called "Handles"), which can be moved to alter the shape.

• Do the same with the other Inner Openings to enclose them one at a time (highlighted here). 

• Hold down the CTRL key and click on each inner Arc of the combined CutArts. 

• Click the Join button.

The Arc Tool tool function allows you to draw a three-point mathematically defined curve in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle") which can be moved to change the shape of the Arc.

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and two separate Middle Points (which are called "Handles"), which can be moved to alter the shape.

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

The Join button will connect the selected segments together as one object in Trace. 

The Auto Join Segments button will automatically join adjacent segments together in Trace.

• The Arcs are now Joined together as one object.

The Arc Tool tool function allows you to draw a three-point mathematically defined curve in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle") which can be moved to change the shape of the Arc.

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and two separate Middle Points (which are called "Handles"), which can be moved to alter the shape.

The Join button will connect the selected segments together as one object in Trace. 

The Auto Join Segments button will automatically join adjacent segments together in Trace.

• Click Edit > Convert Arcs to Splines. 

  • The Splines can be Tangified with less distortion, which will give a smoother cutting path for the design.

• Click on Edit > Tangify all Circuits.

  • This makes each Arc Tangent to each other for smoother cutting.

Click Edit > Convert Arc to Splines to convert the Arcs into Bezier Splines. Splines can be Tangified with less distortion, which will give a smoother cutting path for the design in Trace. 

The Arc Tool tool function allows you to draw a three-point mathematically defined curve in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle") which can be moved to change the shape of the Arc.

• Click the Set Bevels tab.  

• Hold down the CTRL key and click on each segment that makes up the CutArt.

• From the Deboss dropdown control, selected the desired Deboss Cartridge.

The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Templates, you can also Deboss CutArts, LetterMats and TTFs.

• Click on the Deboss Set button.

The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Templates, you can also Deboss CutArts, LetterMats and TTFs.

• The CutArt is traced as a Deboss.

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Templates, you can also Deboss CutArts, LetterMats and TTFs.

The Rotation function in Designer is the action of rotating the selected object(s) around an axis or center by the specified number of degrees.

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.