Page Comparison

Create a Starburst Design with CutArt

Info
This lesson shows how to Mirror a CutArt to create a Scrolled Starburst design.

Expand

title	Mirror Definition

The Mirror function will create a Mirror copy of the selected object along a selected axis in Trace and Visualize.

Expand

title	CutArt Definition

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

Image Removed

Design Template in FrameShop

Place a one Layer 4 x 5" #506 Star Template on the FrameShop Design Editor.

Expand

title	Template Definition

Templates are specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

Image Removed

Click on the Properties tab.
Click on the Parameters tab.
Change the No. of Points to 6.
Change the Spikiness to 0.
Change the Mode to 2.
Change the Line Length to 2.85".

Expand

title	Parameters Definition

The Parameters are a set of specified variable characteristics related to the selected object that can be modified through the accompanying fields in Designer.

For example, the Chamfer is the symmetrical angled surface at the corner of the Template.

In Designer, the Template Parameter Map displays a diagram describing each parameter field for the current Template.

Image Removed

Place a CutArt in the Editor

Click on the Openings tab.
Click the Add CutArt button.

Expand

title	CutArt Definition

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

Image Removed

Select the desired CutArt by either searching for it in the search field or by navigating through the directories.
- I selected ScrollAN for the CutArt.
Click the Edit button.

Expand

title	CutArt Definition

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

Image Removed

Info
The CutArt is placed on the Editor.

Expand

title	CutArt Definition

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

Image Removed

Move the CutArt so that it is aligned with the Top of the Star Template.
If you accidentally click off of the CutArt and it moves behind the Star, hit the PgUp/PgDn key to cycle through the Openings.

Expand

title	CutArt Definition

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

Expand

title	Template Definition

Templates are specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

Image Removed

Bring Design into Trace

Bring the design into Trace via the Right-Click Menu* or from the Cut Preview Screen.
- *If you use the Right-Click method, hold down the CTRL key and select both openings before selecting Convert to CutArt.

Expand

title	CutArt Definition

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

Expand

title	Template Definition

Templates are specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

Image Removed

Draw Alignment Lines

Info
We will add some Alignment Lines that we will use to Mirror the CutArt. You can Mirror the CutArt without the Alignment Lines, but adding them will help illustrate the process.

Click the Line button on the Trace and Draw tab. The Draw radio button is automatically selected.
Right-Click on the Center Point of one of the Lines of the Polygon.

Expand

title	Line Definition

The Line tool in Trace will draw a Two-Point Line.

The Line is defined by two points: the Initial Position and the Terminating Position (which are called “anchors”).

After it is drawn, a third point in the Center is displayed, which can be moved to alter the Line into an Arc.

Expand

title	Mirror Definition

The Mirror function will create a Mirror copy of the selected object along a selected axis in Trace and Visualize.

Image Removed

Right-Click on the Center Point of the opposite Line of the Polygon.

Info
The Line is placed.

Expand

title	Line Definition

The Line tool in Trace will draw a Two-Point Line.

The Line is defined by two points: the Initial Position and the Terminating Position (which are called “anchors”).

After it is drawn, a third point in the Center is displayed, which can be moved to alter the Line into an Arc.

Image Removed

Do the same with the other sides of the Polygon, Right-Clicking and Snapping to the Center Point then Snapping to the Center Point on the opposite Point.

Expand

title	Line Definition

The Line tool in Trace will draw a Two-Point Line.

The Line is defined by two points: the Initial Position and the Terminating Position (which are called “anchors”).

After it is drawn, a third point in the Center is displayed, which can be moved to alter the Line into an Arc.

Image Removed

Mirror the CutArt

Click on the Edit radio button.
Hold down the CTRL key and click on both the Inner and the Outside of the CutArt.
Click the Mirror button.

Expand

title	CutArt Definition

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

Expand

title	Mirror Definition

The Mirror function will create a Mirror copy of the selected object along a selected axis in Trace and Visualize.

Image Removed

Right-Click on the point where the Upper Left Line begins.

Image Removed

Right-Click on the end of the Line at the Lower Right side.

Info
The CutArt has been Mirrored using the Line we drew as the axis.

Expand

title	Line Definition

The Line tool in Trace will draw a Two-Point Line.

The Line is defined by two points: the Initial Position and the Terminating Position (which are called “anchors”).

After it is drawn, a third point in the Center is displayed, which can be moved to alter the Line into an Arc.

Expand

title	CutArt Definition

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

Expand

title	Mirror Definition

The Mirror function will create a Mirror copy of the selected object along a selected axis in Trace and Visualize.

Image Removed

Hold down the CTRL key and select the elements of the next CutArt.
Click the Mirror button.
Right-Click at each end of the Alignment Line.

Expand

title	CutArt Definition

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

Expand

title	Mirror Definition

The Mirror function will create a Mirror copy of the selected object along a selected axis in Trace and Visualize.

Image Removed

Info
The CutArt as been Mirrored using the Line we drew as the axis.

Expand

title	CutArt Definition

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

Expand

title	Mirror Definition

The Mirror function will create a Mirror copy of the selected object along a selected axis in Trace and Visualize.

Expand

title	Line Definition

The Line tool in Trace will draw a Two-Point Line.

The Line is defined by two points: the Initial Position and the Terminating Position (which are called “anchors”).

After it is drawn, a third point in the Center is displayed, which can be moved to alter the Line into an Arc.

Image Removed

Repeat the process. Select all of the Objects of the next CutArt, click the Mirror button, then Snap to each end of the Alignment Line.

Expand

title	CutArt Definition

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

Expand

title	Mirror Definition

The Mirror function will create a Mirror copy of the selected object along a selected axis in Trace and Visualize.

Expand

title	Line Definition

The Line tool in Trace will draw a Two-Point Line.

The Line is defined by two points: the Initial Position and the Terminating Position (which are called “anchors”).

After it is drawn, a third point in the Center is displayed, which can be moved to alter the Line into an Arc.

Image Removed

Info
The CutArt has been Mirrored all the way around the design.

Expand

title	CutArt Definition

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

Expand

title	Mirror Definition

The Mirror function will create a Mirror copy of the selected object along a selected axis in Trace and Visualize.

Image Removed

Break all Intersections

Info
Now we want to Break All of the Intersections where the Lines and Arcs pass over the other Lines/Arcs.

Click Edit > Break all Intersections.

Expand

title	Break Definition

The Breaktool is used to Bisect the Selected Segments at the points where they Intersect in the Trace software.

The Break All Intersections function bisect ALL Segments in the design at the points where they intersect with another segment in the Trace software.

Expand

title	Line Definition

The Line tool in Trace will draw a Two-Point Line.

The Line is defined by two points: the Initial Position and the Terminating Position (which are called “anchors”).

After it is drawn, a third point in the Center is displayed, which can be moved to alter the Line into an Arc.

Expand

title	Arc Definition

The Arc Tool tool function allows you to draw a three-point mathematically defined curve in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle") which can be moved to change the shape of the Arc.

Expand

title	Spline Definition

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and two separate Middle Points (which are called "Handles"), which can be moved to alter the shape.

Image Removed

Info
The Intersections are now Broken where the objects crossed over each other.

Expand

title	Break Definition

The Breaktool is used to Bisect the Selected Segments at the points where they Intersect in the Trace software.

The Break All Intersections function bisect ALL Segments in the design at the points where they intersect with another segment in the Trace software.

Image Removed

Join Segments

Info
We will now Join all of the segments that will make up the outside of the design.

Hold down the CTRL key and click on the Left Side of the Top CutArt.
Click on the Arcs just outside of the Polygon.
Click on the Right Side of the Top CutArt.

Expand

title	CutArt Definition

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

Expand

title	Arc Definition

The Arc Tool tool function allows you to draw a three-point mathematically defined curve in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle") which can be moved to change the shape of the Arc.

Expand

title	Spline Definition

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and two separate Middle Points (which are called "Handles"), which can be moved to alter the shape.

Image Removed

Continue in this manner until you have selected all of the Elements that make up the outside of the design.
Click the Join button.

Info
The segments are now Joined together as one object.

Expand

title	Join Definition

The Join button will connect the selected segments together as one object in Trace.

The Auto Join Segments button will automatically join adjacent segments together in Trace.

Image Removed

Zoom in to the Center of the design.
If you click on one of the Inner Openings, you will see that it is not a complete enclosed object since we Broke the Intersections where the Arcs crossed one another.
Click on one of the Inner Openings and click the Close button.

Info
The Inner Openings is now an enclosed entity.

Expand

title	Break Definition

The Breaktool is used to Bisect the Selected Segments at the points where they Intersect in the Trace software.

The Break All Intersections function bisect ALL Segments in the design at the points where they intersect with another segment in the Trace software.

Expand

title	Arc Definition

The Arc Tool tool function allows you to draw a three-point mathematically defined curve in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle") which can be moved to change the shape of the Arc.

Expand

title	Spline Definition

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and two separate Middle Points (which are called "Handles"), which can be moved to alter the shape.

Image Removed

Do the same with the other Inner Openings to enclose them one at a time (highlighted here).

Image Removed

Hold down the CTRL key and click on each inner Arc of the combined CutArts.
Click the Join button.

Expand

title	Arc Definition

The Arc Tool tool function allows you to draw a three-point mathematically defined curve in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle") which can be moved to change the shape of the Arc.

Expand

title	Spline Definition

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and two separate Middle Points (which are called "Handles"), which can be moved to alter the shape.

Expand

title	CutArt Definition

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

Expand

title	Join Definition

The Join button will connect the selected segments together as one object in Trace.

The Auto Join Segments button will automatically join adjacent segments together in Trace.

Image Removed

The Arcs are now Joined together as one object.

Expand

title	Arc Definition

The Arc Tool tool function allows you to draw a three-point mathematically defined curve in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle") which can be moved to change the shape of the Arc.

Expand

title	Spline Definition

The Curve function allows you to draw a four-point mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and two separate Middle Points (which are called "Handles"), which can be moved to alter the shape.

Expand

title	Join Definition

The Join button will connect the selected segments together as one object in Trace.

The Auto Join Segments button will automatically join adjacent segments together in Trace.

Image Removed

Convert to Splines/Tangify

Click Edit > Convert Arcs to Splines. The Splines can be Tangified with less distortion, which will give a smoother cutting path for the design.
Click on Edit > Tangify all Circuits. This makes each Arc Tangent to each other for smoother cutting.

Expand

title	Convert Arc to Splines

Click Edit > Convert Arc to Splines to convert the Arcs into Bezier Splines. Splines can be Tangified with less distortion, which will give a smoother cutting path for the design in Trace.

Expand

title	Arc Definition

The Arc Tool tool function allows you to draw a three-point mathematically defined curve in the Trace software.

The Arc has three points: the Initial Position and the Terminating Position (which are called "anchors") and one separate Middle point (which is called a "handle") which can be moved to change the shape of the Arc.

Expand

title	Spline Definition

The Curvebutton allows you to draw a mathematically defined Bezier/Spline Curve in the Trace software.

The Bezier/Spline Curve is defined by four points: the Initial Position and the Terminating Position (which are called "Anchors") and Two Separate Middle Points (which are called "Handles"), which can be moved to change the shape of the Curve.

Expand

title	Tangify Definition

The Tangify function will smooth the connection between the Selected Arc Circuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs.

The Tangify All Circuits will smooth the connection between All of the ArcCircuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs.

Image Removed

Trace the Design

Click the Set Bevels tab.
Hold down the CTRL key and click on each segment that makes up the CutArt.
From the Deboss dropdown control, selected the desired Deboss Cartridge.

Expand

title	Bevel Type Definition

The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.

Expand

title	Traced Definition

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

Expand

title	Deboss Definition

The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Templates, you can also Deboss CutArts, LetterMats and TTFs.

Image Removed

Click on the Deboss Set button.

Expand

title	Deboss Definition

The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Templates, you can also Deboss CutArts, LetterMats and TTFs.

Image Removed

Info
The CutArt is traced as a Deboss.

Expand

title	CutArt Definition

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

Expand

title	Deboss Definition

The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Templates, you can also Deboss CutArts, LetterMats and TTFs.

Image Removed

Create a Starburst Design with CutArt

Info
This lesson shows how to Mirror a CutArt to create a Scrolled Starburst design.

Panel

panelIconId	1f9d9-200d-2640-fe0f
panelIcon	:woman_mage:
panelIconText	🧙‍♀️
bgColor	#FFEBE6

See Trace Keyboard Shortcuts.

Image Added

Design Template in FrameShop

First we need to make sure we are designing the layers in the correct order for these instructions.
On the FrameShop Main Page, click Admin and stay on the Defaults tab.
Under Layer Direction select Bottom Up if it is not already set to that.
Click Save and return to the Main Page.
- You can change this back to the original setting later if desired.

Panel

panelIconId	1f9d9-200d-2640-fe0f
panelIcon	:woman_mage:
panelIconText	🧙‍♀️
bgColor	#FFEBE6

Layer Direction: Bottom Up is the preferred direction.
- When you Offset an object to create another layer, that new layer will be the Top layer.
Layer Direction: Top Down is not recommended.
- When you Offset an object to create another layer, that new layer will be the Bottom layer, even though it is larger than the original object.

Image Added

Place a one Layer 4 x 5" #506 Star Template on the FrameShop Design Editor.

Insert excerpt

	Templates Definition
	Templates Definition
name	Templates Definition

Image Added

Click on the Properties tab.
Click on the Parameters tab.
Change the No. of Points to 6.
Change the Spikiness to 0.
Change the Mode to 2.
Change the Line Length to 2.85".

Insert excerpt

	Parameters
	Parameters
name	Parameters Definition

Image Added

Place a CutArt in the Editor
Click on the Openings tab. Click the Add CutArt button.	Image Added
Select the desired CutArt by either searching for it in the search field or by navigating through the directories. This example uses ScrollAN for the CutArt. Click the Edit button.	Image Added
The CutArt is placed on the Editor.	Image Added
Move the CutArt so that it is aligned with the Top of the Star Template. If you accidentally click off of the CutArt and it moves behind the Star, hit the PgUp/PgDn key to cycle through the Openings.	Image Added

Bring Design into Trace
Bring the design into Trace via the Right-Click Menu* or from the Cut Preview Screen. If you use the Right-Click* method, hold down the CTRL key and select both openings before selecting Convert to CutArt.	Image Added

Draw Alignment Lines

Info
We will add some Alignment Lines that we will use to Mirror the CutArt. You can Mirror the CutArt without the Alignment Lines, but adding them will help illustrate the process.

Click the Line button on the Trace and Draw tab. The Draw radio button is automatically selected.
Right-Click on the Center Point of one of the Lines of the Polygon.

Insert excerpt

	Line Tool Definition
	Line Tool Definition
name	Line Tool Definition

Image Added

Right-Click on the Center Point of the opposite Line of the Polygon.

Info
The Line is placed.

Image Added

Do the same with the other sides of the Polygon, Right-Clicking and Snapping to the Center Point then Snapping to the Center Point on the opposite Point.

Image Added

Mirror the CutArt

Click on the Edit radio button.
Hold down the CTRL key and click on both the Inner and the Outside of the CutArt.
Click the Mirror button.

Insert excerpt

	Mirror
	Mirror
name	Mirror Definition

Image Added

Right-Click on the point where the Upper Left Line begins.

Image Added

Right-Click on the end of the Line at the Lower Right side.

Info
The CutArt has been Mirrored using the Line we drew as the axis.

Image Added

Hold down the CTRL key and select the elements of the next CutArt.
Click the Mirror button.
Right-Click at each end of the Alignment Line.

Image Added

The CutArt as been Mirrored using the Line we drew as the axis.

Image Added

Repeat the process.
Select all of the Objects of the next CutArt, click the Mirror button, then Snap to each end of the Alignment Line.

Image Added

The CutArt has been Mirrored all the way around the design.

Image Added

Break all Intersections

Info
Now we want to Break All of the Intersections where the Lines and Arcs pass over the other Lines/Arcs.

Click Edit > Break all Intersections.

Insert excerpt

	Break All Intersections Definition
	Break All Intersections Definition
name	Break All Intersections Definition

Image Added

The Intersections are now Broken where the objects crossed over each other.

Image Added

Join Segments

Info
We will now Join all of the segments that will make up the outside of the design.

Hold down the CTRL key and click on the Left Side of the Top CutArt.
Click on the Arcs just outside of the Polygon.
Click on the Right Side of the Top CutArt.

Image Added

Continue in this manner until you have selected all of the Elements that make up the outside of the design.
Click the Join button.

Info
The segments are now Joined together as one object.

Insert excerpt

	Join Tool Definition
	Join Tool Definition
name	Join Tool Definition

Image Added

Zoom in to the Center of the design.
If you click on one of the Inner Openings, you will see that it is not a complete enclosed object since we Broke the Intersections where the Arcs crossed one another.
Click on one of the Inner Openings and click the Close button.

Info
The Inner Openings is now an enclosed entity.

Insert excerpt

	Close Tool Definition
	Close Tool Definition
name	Close Tool Definition

Image Added

Do the same with the other Inner Openings to enclose them one at a time (highlighted here).

Image Added

Hold down the CTRL key and click on each inner Arc of the combined CutArts.
Click the Join button.

Image Added

The Arcs are now Joined together as one object.

Image Added

Convert to Splines/Tangify

Click Edit > Convert Arcs to Splines.
- The Splines can be Tangified with less distortion, which will give a smoother cutting path for the design.
Click on Edit > Tangify all Circuits.
- This makes each Arc Tangent to each other for smoother cutting.

Insert excerpt

	Convert Arc to Splines
	Convert Arc to Splines
name	Convert Art to Splines Definition

Insert excerpt

	Tangify All Circuits Definition
	Tangify All Circuits Definition
name	Tangify All Circuits Definition

Image Added

Trace the Design

Click the Set Bevels tab.
Hold down the CTRL key and click on each segment that makes up the CutArt.
From the Deboss dropdown control, select the desired Deboss Cartridge.
Click on the Deboss Set button.

Image Added

The CutArt is traced as a Deboss.

Insert excerpt

	Traced
	Traced
name	Traced Definition

Insert excerpt

	Deboss Cartridge
	Deboss Cartridge
name	Deboss Cartridge

Image Added

titleRotate

Rotate the CutArt

Info
Now we want to Rotate the CutArt to be more symmetrically balanced. Select one of the two choices below to continue this lesson:

Expand

Insert excerpt

	Rotation of Objects in Trace

Definition

The

	Rotation

function in Traceis the action of rotating the selected object(s) around an axis or center by the specified number of degrees.

Expand

title	Rotate in Designer Definition

The Rotation function in Designer is the action of rotating the selected object(s) around an axis or center by the specified number of degrees.

Expand

title	CutArt Definition

CutArt™ are simple shapes and design elements created by Wizard.

CutArts can be applied to your current design and resized and rotated. They can be Cut, Debossed, Penned or cut on Vinyl.

Image Removed

of Objects in Trace
name	Rotation of Objects in Trace Definition

Insert excerpt

	Rotation of Objects in the Design Editor
	Rotation of Objects in the Design Editor
name	Rotation Designer

Image Added

Related Links	Default Settings
Tangification Highlight Function	Layer Direction: Application Default Setting

Versions Compared

Old Version 15

New Version Current

Key

Create a Starburst Design with CutArt

Design Template in FrameShop

Place a CutArt in the Editor

Bring Design into Trace

Draw Alignment Lines

Mirror the CutArt

Break all Intersections

Join Segments

Convert to Splines/Tangify

Trace the Design

Create a Starburst Design with CutArt

Design Template in FrameShop

Place a CutArt in the Editor

Bring Design into Trace

Draw Alignment Lines

Mirror the CutArt

Break all Intersections

Join Segments

Convert to Splines/Tangify

Trace the Design

Rotate the CutArt

Related Links

Default Settings