Versions Compared

Old Version 28

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version 29

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Make a Stain Glass Window

Info

  • This lesson shows how to combine two Templates to make a different design.

Panel
panelIconId1f9d9-200d-2640-fe0f
panelIcon:woman_mage:
panelIconText🧙‍♀️
bgColor#FFEBE6
. Expand
titleTemplate Definition
Templatesare specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use

  • .

Image RemovedSee: Template Properties

See: Template Library

Image Modified
titleTemplate

Design in FrameShop then Bring into Trace

  • First we need to make sure we are designing the layers in the correct order for these instructions.

  • On the FrameShop Main Page, click Admin and stay on the Defaults tab.

  • Under Layer Direction select Bottom Up if it is not already set to that.

  • Click Save and return to the Main Page.

    • You can change this back to the original setting later if desired.

Panel
panelIconId1f9d9-200d-2640-fe0f
panelIcon:woman_mage:
panelIconText🧙‍♀️
bgColor#FFEBE6

  • Layer Direction: Bottom Up is the preferred direction.

    • When you Offset an object to create another layer, that new layer will be the Top layer.

  • Layer Direction: Top Down is not recommended.

    • When you Offset an object to create another layer, that new layer will be the Bottom layer, even though it is larger than the original object.

2LayerLetterMatDefaultDirection800.pngImage Modified
Info

  • This lesson shows how to combine two Templates to make a different design.

  • Change the Layer Reveals. The Large Reveal will be the padding between the objects in the finished piece.

    • Layer 3 is .25 reveal

    • Layer 2 is 1” reveal.

    • Layer 1 is .25” reveal.

Expand
Insert excerpt
Templates Definition
Templates
are specialized parametric shape generators created by Wizard.

Many of the templates have additional Properties that can be edited which can change the shape, curves and corners of the design as well as a wide assortment of Parameters.

The Template Library displays the different templates that are available for use.

Image Removed

See: Template Properties

See: Template Library

Expand
titleReveal Definition

In a two-layer design, the Reveal is the amount of the bottom matboard showing under the top mat in the Design Editor and Visualize.

The standard Reveal between the top and bottom mat is 1/4".

Image Removed

See: Design Editor Reveal Function

Definition
nameTemplates Definition
Image Modified

  • Change the Layer Reveals. The Large Reveal will be the padding between the objects in the finished piece.

    • Layer 3 is .25 reveal

    • Layer 2 is 1” reveal.

    • Layer 1 is .25” reveal

. Expand
titleReveal Definition

In a two-layer design, the Reveal is the amount of the bottom matboard showing under the top mat in the Design Editor and Visualize.

The standard Reveal between the top and bottom mat is 1/4"

    • .

Image Removed

See: Design Editor Reveal Function

titleCutArt
Image Modified

  • Make sure that the Imperial opening is centered over the Circle.

Image ModifiedL7StainedImperialOvalCenter70800.pngImage Modified
Expand
Insert excerpt
CutArt™ Definition
CutArt™
are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

CutArtExample70800.pngImage RemovedSee: Add CutArt Function
Definition
nameCutArt Definition
Image Modified

Break all Intersections

Expandtitle
Insert excerpt
Break
Definition

The Break Tool tool is used to Bisect the Selected Segments at the point where they Intersect in the Trace software.

The Break All Intersections function bisects ALL Segments in the design where they intersect in the Trace software.

Image RemovedSee: Break All Intersections Function
All Intersections Definition
Break All Intersections Definition
nameBreak All Intersections Definition
Image Modified

  • The Intersections are now Broken where the elements crossed over each other.

Expandtitle

The Break Tool tool is used to Bisect the Selected Segments at the point where they Intersect in the Trace software.

The Break All Intersections function bisects ALL Segments in the design where they intersect in the Trace software.

Image Removed

See: Break All Intersections Function

Break Definition
Image Modified

Join Segments

  • Click the Edit radio button.

  • Hold down the CTRL key and click on each segment making up the Upper Left-Hand Inner Section.

expand
Insert excerpt
title
Join
Definition

The Join button will connect the Selected Segments together as one object in Trace. 

The Auto Join Segments button will automatically join All Adjacent Segments together in Trace.

Image Removed

See: Join Tool Function

See: Auto Join Segments Function
Tool Definition
Join Tool Definition
nameJoin Tool Definition
Image Modified
Info

  • The segments are Joined together to create a single object.

Expand
titleJoin Definition

The Join button will connect the Selected Segments together as one object in Trace. 

The Auto Join Segments button will automatically join All Adjacent Segments together in Trace.

Image Removed

See: Join Tool Function

See: Auto Join Segments Function

Image Modified

  • Do the same for the other three corners to create the Bottom Layer

. Expand
titleJoin Definition

The Join button will connect the Selected Segments together as one object in Trace. 

The Auto Join Segments button will automatically join All Adjacent Segments together in Trace

  • .

Image RemovedSee: Join Tool Function

See: Auto Join Segments Function

Image Modified
Info

  • Now we’ll do the same thing for the Top Layer.

  • Hold down the CTRL key and click on each segment making up the Upper Left-Hand Outer Section. 

    • Don't forget the small Lines that make up the corners

.
Expand
titleJoin Definition

The Join button will connect the Selected Segments together as one object in Trace. 

The Auto Join Segments button will automatically join All Adjacent Segments together in Trace.

Image Removed

See: Join Tool Function

See: Auto Join Segments Function

Expand
titleLine Definition

The Line/wiki/spaces/FrameShop8x/pages/1942694019tool in Trace will draw a Two-Point Line. 

The Line is defined by two points: Initial Position (called an Anchor) and the Terminating Position (called an Anchor)

    • .

After it is drawn, a third point in the Center will be displayed, which can be moved to alter the line into an /wiki/spaces/FrameShop8x/pages/1942509136.

Image Removed

See: Line Tool Function

Image Modified
Panel
panelIconIdatlassian-info
panelIcon:info:
bgColor#DEEBFF

  • The segments are Joined together to create a single object.

Expandtitle

Join Definition

The Join button will connect the Selected Segments together as one object in Trace. 

The Auto Join Segments button will automatically join All Adjacent Segments together in Trace.

Image Removed

See: Join Tool Function

See: Auto Join Segments Function

Image Modified

  • Do the same for the other three corners to create the Top Layer.

Expand
titleJoin Definition

The Join button will connect the Selected Segments together as one object in Trace. 

The Auto Join Segments button will automatically join All Adjacent Segments together in Trace.

Image Removed

See: Join Tool Function

See: Auto Join Segments Function

Image Modified

Trace the Design

  • Click on the Set Bevels tab.

  • Click on the Top Layer which is displayed topmost of the Layer List.

    • It will display that the Top Layer is already Traced

. Expand
titleTraced Definition
Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC

    • .

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

Image Removed

See: Tracing the Design

Image Modified

  • Click on the Second Layer down from the top.

  • It will display that the Second Layer is already Traced

. Expand
titleTraced Definition

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design

  • .

Image RemovedSee: Tracing the Design

Image Modified
Info

  • We need to Trace the outer openings we created for this layer.

  • Click on the Third Layer down from the Top.

  • Hold down the CTRL key and click on each Outer Opening in the corners.

  • Click the 45° Bevel Set button. 

Expand
titleTraced Definition
Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

Image Removed

See: Tracing the Design

Image Modified

  • The Third Layer is now Traced. 

Expand
titleTraced Definition

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

Image RemovedSee: Tracing the Design.

Image Modified
Info

  • We need to trace the inner openings we created for this layer. Hold down the CTRL key and click on each inner opening in the corners.

Expandtitle

Traced Definition

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

Image Removed

See: Tracing the Design

Image Modified

  • The Fourth Layer is now Traced. 

expand
Insert excerpt
title
Traced
Traced
Definition

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

Image Removed

See: Tracing the Design

nameTraced Definition
Image Modified
title

Convert to Splines/Tangify

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6
Expand
Insert excerpt
Convert Arc to Splines
Definition
The
Convert Arc
to Splines process will convert the Arcs
to
/wiki/spaces/FrameShop8x/pages/1942513851 which are easier to tangify to make cuts smoother.Image Removed

See: Arcs Definition

See: Arcs Tool Function

See:
Splines
Definition

See: Splines Tool Function

See: Convert Arc
nameConvert Art to Splines
Function Expandtitle
Definition
Insert excerpt
Tangify
Tool
All Circuits Definition
The 
Tangify
 function will smooth the connection between the Selected Arc Circuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs. The Tangify All Circuits will smooth the connection between All of the ArcCircuits that are below the specified Angle in the Tangify field to provide a smoother cutting transition between the arcs. Image Removed

See: Tangify Function

See: Tangify All Circuits Function

See: Arc Tool in Trace

See: Arc Tool Definition/wiki/spaces/FrameShop8x/pages/1942694083

See: Splines Definition

See: Convert Arc to Splines Function 

All Circuits Definition
nameTangify All Circuits Definition
Image ModifiedImage Modified

Save, Cut

  • Save the CutArt. You will get a message stating that this design contains objects that do not have an assigned bevel type. This refers to the leftover Arcs and Lines that we didn't Trace. Click Yes that you wish to continue.

  • Load the CutArt.

  • Cut the CutArt.

  • Optionally, you can also bring the CutArt straight to the Cut Preview from Trace.

Info

  • The Stained Glass design is completed.

Expand
titleTraced Definition

Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC.

The Set Bevels Tab in Trace contains the tools needed to Trace the design.

Image Removed

See: Tracing the Design

Expand
titleCutArt Definition

CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

CutArts can be applied to your current design and edited, such as resizing and rotating.

They can be Cut, Debossed, Penned or cut on Vinyl.

CutArtExample70800.pngImage RemovedSee: Add CutArt Function
Insert excerpt
CutArt™ Definition
CutArt™ Definition
nameCutArt Definition
Image Modified

Comparison

You can see how much we changed the design when you compare it to the original version.

Image ModifiedImage Modified

Default Settings