Check out our new How To section at: How To...

V-Groove Properties

Owned by dani.simmonds
Last updated: Aug 14, 2024
10 min read

V-Groove Properties

V-Groove Properties

  • A V-Groove is a decorative channel cut about halfway through the thickness of the matboard, exposing the matboard core.

  • Click on the V-Groove to select it and click on the Properties Tab to edit it.

    • Optionally, Right-Click on the V-Groove and select Properties to open the V-Groove Properties.

  • Use V-Groove Properties to edit the individual proprietary adjustments available for the V-Groove.

Contents:

The Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement. The matboard is sliced halfway through the thickness and the core is visible from the front.

First Cut: Cuts the Interior cut into the Fallout Clockwise.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

Select V-Groove from the Current Bevel Type dropdown control to edit this configuration.

Closed V-Groove
BevelType45VGSelect70800.jpg
Normal Bevel Closed V-Groove

See: 45 Degree Closed V-Groove Configurations

See: 45 Degree Plus Closed V-Groove Configurations

See: 45 Front Closed V-Groove Configurations

See: 52 Degree Closed V-Groove Configurations