Tape Measure Properties

• Click on the Measuring Tape and click on the Properties Tab. 

• Optionally, Right-Click on the Measuring Tape and select Tape Measure Properties.

• Use the Tape Measure Properties to edit the individual proprietary adjustments available for the Tape Measure.

• Point 1 and Point 2 are the two control points of the Tape Measure. 

• These points are referenced from the bottom-left of the design, which is 0,0.

Point 1 is the Lower Left point of the Tape Measure.

• X is the Horizontal position.

• Y is the Vertical position.

• Edit the fields to move the Tape Measure point.