This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

52 Degree V-Groove

The 52 Degree Cartridge cuts the V-Groove with a 52° bevel. 

Select the 52 Degree V-Groove Bevel Type

Select the 52° Tab on the Configurations screen.

Select V-Groove from the Current Bevel Type dropdown control.

Select the Area of Concern for V-Grooves Below:

V-Groove Cuts in the Wrong Place Horizontally

Select this topic to adjust the Horizontal Home.

V-Groove Cuts in the Wrong Place Vertically

Select this topic to adjust the Vertical Home.

Blade Depth is Incorrect When Using a SKU

Select this topic to adjust the Depth Bias.

Does Not Pause for Blade Change

Select this topic to adjust the Plunge Count.

Circle/Oval Rotation Button Utility

Select this topic to access the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals.

Exterior Backup is too Long

Select this topic to adjust the Exterior Backup.

Exterior Backup is too Short 

Select this topic to adjust the Exterior Backup.

Exterior Overcut is too Long

Select this topic to adjust the Exterior Overcut.

Exterior Overcut is too Short

Select this topic to adjust the Exterior Overcut.

Interior Backup is too Long

Select this topic to adjust the Interior Backup.

Interior Backup is too Short

Select this topic to adjust the Interior Backup.

Interior Overcut is too Long 

Select this topic to adjust the Interior Overcut.

Interior Overcut is too Short 

Select this topic to adjust the Interior Overcut.

V-Groove Cuts the Wrong Size

Select this topic to adjust the Opening Adjustment.

V-Groove Cuts too Thin 

Select this topic to adjust the Width Adjustment.

V-Groove Cuts too Thick 

Select this topic to adjust the Width Adjustment.

V-Groove has an Outside Swoop 

Select this topic to adjust the Outside Rotation.

V-Groove has an Outside Flare

Select this topic to adjust the Outside Rotation.

V-Groove has an Inside Swoop 

Select this topic to adjust the Inside Rotation.

V-Groove has an Inside Flare 

Select this topic to adjust the Inside Rotation.

Oval V-Groove has an Outside Bump

Select this topic to adjust the Outside Oval Rotation.

Oval V-Groove has an Outside Feather 

Select this topic to adjust the Outside Oval Rotation.

Oval V-Groove has an Inside Bump 

Select this topic to adjust the Inside Oval Rotation.

Oval V-Groove has an Inside Feather 

Select this topic to adjust the Inside Oval Rotation.

Troubleshooting Button 

Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. 

  • No labels