45 Degree Cartridge: All Current CMC Models

45° Blade Cartridge: Cartridge Manual: All Current CMC Models

45° Blade Cartridge: Cartridge Manual: All Current CMC Models

Contents:


  • The 45° metal black blade cartridge* is designed to cut 45° bevels on standard 4-ply matboard.

The 45° Cartridge cuts the matboard surface with the blade angled at 45°.

This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type determines the initial blade plunge position.

Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

45° Cartridge Configurations

See: 45 Degree Normal Bevel Opening Definition

See: 45 Degree Reverse Bevel Opening Definition

See: 45 Degree Normal Bevel Drop Definition

See: 45 Degree Reverse Bevel Drop Definition

See: 45 Degree Outside Definition

See: 45 Degree Normal Bevel Closed V-Groove Definition

See: 45 Degree Normal Bevel Open V-Groove Definition

See: 45 Degree Reverse Bevel Open V-Groove Definition

45MetalBevelOpeningCartridge70800.png
45° Normal Bevel Opening and Cartridge

Â